Mining Flameproof Light Weight Conveyor Belt Jointing Splicing Machine 1600mm

Conveyor Belt Vulcanizing Machine Specification

Main Parameter:

Conveyor Belts Max. Width: 1600mm
Splicing Length: 830mm
Heating Length: 1830mm
Splicing Length: 16° 42
Surface Pressure: 70N/cm²
Voltage: 415/400V, 50HZ, 3 phases + N + PE

Mining Flameproof Light Weight Conveyor Belt Jointing Splicing Machine 1600mm are made of high strength aluminum alloy. It is equipped with automatic explosion-proof electric cabinet and has 0-2Mpa even pressure offered by the pressure system, so it is easily operated, portably carries. It warms up by electric heating element, so it works stably with high thermal efficiency and homogeneous temperature. Now it has been widely used in the joint and patch of vuloanization machine in the field of metallurgy, mining, cerement, electric power, wharf, building materials, chemical industry etc. it has following characters:

(1)Light weight, it is the 1/4 weight of the ordinary.
(2)Large expansion amplitude.
(3)Uniform pressure and the pressure can reach 3.0MPa.
(4)No water leakage and long life.

TECHNICAL PARAMETERS

Note: Mining Flameproof Light Weight Conveyor Belt Jointing Splicing Machine 1600mm

• Specifications are subject to change without notice;
• Build-in cooling standard on all units;
• Total weights include electrical control panel, cable set and set up templates for all models;
• 200 PSI models include fluid pressure pump and reservoir unit Model HPP20-4(mandatory for operating pressure above 100PSI/7 kg/cm sq);
• Temperature adjustable between 0-199deg.C;
• Sectional vulcanizers are built on a 22 degree bias, 16/20 or other degree are optional;
• Custom sizes, rectangular configurations and multiple platen arrangements available on request.

*********************************************************

When order, pls supply below information, our technician will make a solution for you, or pls choose one model from bottom traditional sizes table

• Max belt width
• Heating platen length (or pls supply belt manufacturer’s recommended splice length)
• What kind of belt, light duty belts or heavy duty belts, belt model No.
• Working Voltage
• Pressure requirements (as our experience, normal is 0.8Mpa, for EP belts is 1.2Mpa, for steel cord belts is 1.4Mpa)
• Degree of heating platen (standard will be 22 degree)

Normal vulcanizer model sheet:

A= Splice Length
B= Bet Width
C=Length of platen along the belt
D= Width of platen
measured square to beltline
E= Bias Ange
F=Width of platen along the belt on bias

Main Componets of Mining Flameproof Light Weight Conveyor Belt Jointing Splicing Machine 1600mm

• Bars are available in various profiles and lengths to provide a custom solution for your needs
• Bars are specially designed for running machine and manufactured out of quality extruded aluminum
• Various bolt and nut styles complement each bar type and provide a secure, pressurized splice

BEAM of Mining Flameproof Light Weight Conveyor Belt Jointing Splicing Machine 1600mm

2. TENSION BOLT

• Tension bolts made of high-strength steel, however,

• 2 kg less apiece than conventional steel tension bolts

• Tension bolt threads protected against damage

• Tension bolts sealed up and protected against pollution

AVAILABLE CROSSBEAM SIZES

3. Lightweight aluminum platens use new rapid cooling system within platens.

4. Custom sizes, rectangular configurations and multiple platen arrangements are also available on request.

5. ELECTRONICS CONTROL CABINET

• Design of required control cabinet depends on number of heating plates
• Exact temperature measurement inside of heating plates via double PT 100, digital display of set point and real value temperature
• Quick programming of electronic temperature controllers
• Voltage monitor for protection against over-voltage

• In case of electronic control failure switch to manual operation mode
• Digital automatic timer
• Monitoring of differences between the single heating circuits +/- 2.5 K
• Optical signal shows end of vulcanizing time
• Minimum protection class IP 44