Rubber Conveyor Belt Splicing Joint Machine/ Hot Vulcanizing Press

* The "three elements" of the conveyor belts jointing host are: reliable vulcanizing temperature, vulcanizing pressure uniform and accurate temperature vulcanizing time.

*The main parts are manufactured from aluminum and sheet elements heating, with smooth, reliable, little current, high efficiency.

*Water-cooled type vulcanizing machine, it is designed for the better of saving time. From the vulcanizing temperature to 60 ℃ ,it only needs 20 minutes.

Machine specification of Conveyor Belt Splicing Tools:

Main Parts:

Application:

Method and Procedure of Conveyor Belt Splicing Machine

Hot vulcanizing is a method of repair that uses both heat and pressure to join repair materials with compromised sections of the belt. The belt must be cleaned and free of all oily, greasy substances before starting.

Typically, the damaged portion of the belt is removed or trimmed down, and a new section is bonded in its place using an adhesive like glue or cement. Often, technicians will overuse the adhesive, subscribing to an “if a little is good, then a lot is better” approach, but that isn’t necessarily true. The belt is then cured to bond the materials.

The hot vulcanizing method is ideal for cuts or tears, holes or breakdowns between steel cords and fabric. It can be executed in dusty environments and is suitable for all types of belts with varying widths and thickness.

Our Advantages:

• Control Box – The VUL-CON Switchgear Box is the most advanced control system in the world. Incorporating controls for 2 platens. Splice data can be stored and recalled through the built-in data logger.
• Heating Element – Silicone Rubber heaters with wire-wound elements provide excellent physical strength capable of withstanding repeated flexing without compromising the life and performance of the heater.
• Robust Rubber Pressure Bag – with aramid reinforcement distributes uniform pressure and is available in 22° bias and can be custom made upon request.
• Platen--Each sectional press is constructed with aluminum flexible platens that contour to the conveyor belt surface during splicing
  Platens are individually designed and include extruded plank,silicone heating elements (up to 163 °C/325 °F), and durable composite insulating packaging Sturdy electrical connectors and moisture-proof latch enhance press durability
• Platen Cables – Connects to the temperature controller and vulcanizing platens.

Package of Conveyor Belt Splicing Tools:

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tiger,we will use pe film for packing or pack it according to customers special request.