1800mm Width Rubber Steel Cord Conveyor Belt Lightweight Jointing Vulcanizing Machine

What is conveyor belt jointing vulcanizing?

Conveyor belt jointing vulcanizing is the process of joining together two pieces of conveyor belt. Usually, this is done to either elongate the original conveyor belt or to repair a torn or damaged conveyor belt.

There are several different types of vulcanized splices, including finger splice, wedge splice, stepped splice and overlap splice. And two types of vulcanizing processes: hot vulcanization and cold vulcanization.

Machine specification is as following, you can choose a type according to the conveyor belt width.

Features:

1.Machine Maximum size: from 300MM-2000MM,Or according the customer
2.Voltage: 220V 380V 415V 660V 50HZ;
3.Fast Cooling time: 15 minutes (from 145 degrees down to 70 degrees or less);
4.Time for temperature raise (from normal temperature to vulcanizing temperature) no more than 25 minutes;
5.The temperature difference of sulfide surface: ±2°c.
6.Temperature adjustment range: 0~300°c.
7.Vulcanizing pressure: 0~2.5 MPa (details refer to users' specifications and factory markings);
8.Time of heat preservation for vulcanizing could be adjusted according to thickness of the rubber belts;
9. Splicing length of rubber conveyor belt for vulcanizing jointing could be connected together by single or several pieces if necessary;
10. rubber conveyor belt as well as tension in kilogram required for vulcanizing jointing when ordering products.
11. Users could order spare electric pumps additionally according to the requirements.

Our conveyor belt jointing vulcanizing machine use new designed water pressure bladder, which is made of rubber, for pressurizing. it has the advantages of more balanced pressure, better scalling, no rusting risk and lower leakage risk and longer service life.

Shipping package of conveyor belt jointing vulcanizing machine: