Brand New Large Capacity H8 DIN 12V180Ah Rechargeable LiFePO4 Battery For RV Camper

Product Description

LiFePO4 (Lithium Iron Phosphate) batteries with built-in communication ports offer advanced monitoring and control capabilities, enhancing their performance, safety, and convenience in various applications. These communication ports enable the battery to communicate with external devices such as inverters and monitoring software.

Specification of Lifepo4 Battery 12v 180AH in Comms

Power On/Off Button:

There is an ON/OFF switch on the battery side which can be used to switch the battery on or off. If the battery is not used for a long period of time (e.g. in winter storage), it should also be switched off to prevent consumers from continuing to discharge the battery.

Communication

Each 12V battery in comms has 2 communication ports. These ports utilize the CAN (Controller Area Network) and RS485 ( Recommended Standard 485 ) protocol. CAN, RS485 and Bluetooth enable data transmission to meet the needs of different usage scenarios and improve the efficiency, reliability, and safety of the system.

Key Features:

1. Communicate with external devices like LCD display and inverters.

2. Support batteries communication in parallel connection.

3. Convenient for manufacturer or professional engineer to debug or service.

Battery Management System(BMS)

Inbulit BMS provide strong protection and keep battery safely to use.

●Overvoltage & undervoltage

●Over-temperature & under-temperature

●Unbalanced cell voltages

●Overload due to excessive current

●Short circuit outside the battery

Battery Management System (BMS) with Bluetooth monitoring

With intelligent BMS and Bluetooth communication, BeLY bluetooth series LiFePO4 battery ensure to check and monitor the battery voltage, current and temperature events to maximize battery safety, performance and life.

Intelligent Self-heating Function

Integrated strong heating film with the highest possible effectiveness and efficiency (extremely fast and completely even heating of all cells). The integrated heating film starts at temperatures below 0°C when a charging current 10A is applied. No battery discharge due to the integrated heater.