CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Billet For Wire Rod Production

Product Normal Description:

Product Name: Beryllium copper Billet

Grade: CuBe2 C17200 BrB2 Alloy 25

Dia.: 100~200mm

Length: 500~600mm

State: A(TB00)

Product Brand: CUBERYLLIUM®

Introduction of CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Billet:

We could provide C17200, also called CuBe2, BrB2, Alloy 25, beryllium copper billet.

With diameter 100~200mm, and the length 500~600mm.

The beryllium copper billet could be used for the production of rods and wires.

We also could provide C17300, C17500, C17510 beryllium copper billet.

If you have any requirement on the beryllium copper alloys, plz feel free to contact with us.

CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Alloy Chemical Composition:

Note: Copper plus additions equal 99.5% Minimum.

Typical Physical Properties of CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Alloy:

Typical Application for CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Alloy:
Electrical Industry: Electrical Switch and Relay Blades, Fuse Clips, Switch Parts, Relay parts, Connectors, Spring Connectors, Contact Bridges, Belleville Washers, Navigational Instruments, Clips
Fasteners: Washers, Fasteners, Lock Washers, Retaining Rings, Roll Pins, Screws, Bolts
Industrial: Pumps, Springs, Electrochemical, Shafts, Non-Sparking Safety Tools, Flexible Metal Hose, Housings for Instruments, Bearings, Bushings, Valve Seats, Valve Stems, Diaphragms, Springs, Welding Equipment, Rolling Mill Parts, Spline Shafts, Pump Parts, Valves, Bourdon Tubes, Wear Plates on Heavy Equipment, Bellows.

Product Photos:

International Specification of CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Billet:

Rods/Bars/Tubes: ASTM B196,251,463; SAE J461,463; AMS 4533,4534,4535; AMS 4650,4651; RWMA Class 4

European Standards: CuBe2, Alloy 25, QBe2, BrB2, DIN.2.1247, CW101C to EN

Note:

ASTM: American Society for Testing and Materials

SAE: Society of Automotive Engineers

AMS: Aerospace Materials Specification(Published by SEA)

RWMA: Resistance Welder Manufacturers' Association

Note: Unless otherwise specified, material will be produced by ASTM.

FAQ:

Q1: Could you produce Beryllium Copper strip by Mill Hardened process.
A1: Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06) XHMS(TM08).,we are the only factory could do harden strip in China.

Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil

2: We are the only one who melting by Vacuum semi-Continuous Furnace.

3: Surface further polishing for top clients.

Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3: Could be get the Cast ingot without gas,smaller segregation, Grain Refinement

Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the amount is different.