Good Full Auto RO Water Purifier Pure Water Treatment Plant

China-Beverage's RO Series RO water purifier are designed to reduce dissolved solids, and remove bacteria, heavy metal iron, and organic contaminants from tap or well water, adopting the highly efficient RO Membranes.

The product water is used in applications such as rinse water, pharmaceutical, food processing, bottled water, hotels, beverage, hospitals, and a wide variety of other applications for water purification.

Typically, our equipments include pre-treatment and Reverse Osmosis treatment
1. Quartz sand filter to removal the particulate solids more than 10 Micron
2. Activated carbon filter to removal the chlorine
3. Water softener filter to prevent scaling of the membrane
4. PP filter cartridge filters to prevent larger than 5 Micron particulate solids
5. 1-Stage or 2-Stage passing through RO main machine to make the pure water

Optional post-treatment and other treatment system
1. Ozone sterilization treatment
2. Ultraviolet System sterilization treatment
3. Chemical dosing washing system
4. 2-stage passing through RO main machine to make more pure water

Standard Features
High rejection thin film RO membranes
Stainless steel frames (powder coated is optional)
Durable & Efficient Stainless Steel Pressure Pump & motors
Electronic control pan
Level controls (on / off)
Panel Mount Flow Meters (product water & concentrate)
Pressure regulator valves
Oil-filled pressure gauges for inlet and concentrate
304 Stainless steel membrane housings
Heavy-duty pressure tubing
Product water flow meter
304SS PP sediment filter container
Starter motor box
On / off switch
Solenoid valves (pump & flush)
Factory tested and sterilized
Comprehensive one year limited warranty
RO membrane auto wash and manual wash
Pure water height water level auto stop, low water lever auto run
Multi-levels pump no water protect
Low pressure shut-off and restarts
No/poor power, short circuit, over burden electric current, creepage protects.
220 /380/415 Volt, 60 Hertz, 3 Phases or single phase