18000BPH Automatic 3 in 1 Carbonated Soft Drink Filling Machine

General Description

The DXGF series is applied for PET bottle carbonated soft drinks, soda water, energy drinks filling, combined with bottle rinsing, filling and capping. It is innovated and designed in the requirement of carbonated beverage technics, on the bases of introducing, digesting and absorbing advanced technology abroad. It is reasonable in structure, safe to operate and easy to maintain, which is an ideal choice for beverage factory.

Technical Parameters
- Number of Filling Valves: 50

- Filling Speed: 18,000BPH (500ml)
- Type of Bottles: PET Bottles of various shapes
- Bottle Height: 150-320(mm)
- Bottle Diameter: φ 50-110(mm)
- Filling Temperature: 0-4℃
- Filling Principle: Isobaric Filling
- Filling Product: Carbonated soft drinks (Cola, Fanta), Soda Water, Isotonic Drinks, etc

Main advantage

1). Including bottle air conveyor, rinser-filler-capper and conveyor belt and cap elevator, cap unscrambler.
2). It has the characteristics of filling reposefully, high speed, liquid level control, capping reliably, frequency conversion timing, less material loss
3). Bottles are rinsed internally and externally, No bottle, No Rinsing
4). Precise and Accurate Pressure filling valves give even filling in all bottles at the same level, No bottle, No filling.
5). Magnetic capping head eliminates over-tightening of caps, No bottle, No capping.
6). Adjustable speed by inverter.
7). Fast and easy changeover to various bottle sizes.
8). Unique design bottle neck suspend system makes bottle move smoothly.
9). Easy to operate, clean and maintain.
.

Machine Description

1). Bottle in-feeding
Adopt technology of air conveyor direct connect with bottle infeed starwheel and neck handling technology to convey bottles.

2). Rinsing part
It's rotary rinsing machine, which mainly use for beverage such as carbonated drink, new bottle enter the equipment by star wheel, through clip and overturn mechanism make bottle down, after rinsing, it overturn bottle up automatically, then convey to the filling part by star steel, the main material and washing clip is stainless steel .

3). Transfer Starwheel
The material is super-corrosion stainless steel ,the wheel has block bottle protect device.

4). Filling part
The filling part is manly composed of a filling valve and filling transmission parts. The washed bottle reachesthe filling position via the bottle shifting wheel. In the mean time, the bottle clamping plate of the filling machine will clamp the bottle and move up to seal the bottle, filling valve will open, send the liquid into the bottle. When the liquid level of the bottle reaches the trachea of the filling valve, the filling will stop.

5). Capping part

The capping part consists of screw heads, capping transmission part, a sorting part and an under cover tube parts. The bottle which has finished filling will enter the capping position via the driving wheel.
Bottles that have finished capping will be transported by the bottle pusher to the conveyor belt.

Main configuration

If you have any interest in our machines, welcome feel free to contact with us.