Mars 80 packs per minute speed single double layer stacking half tray film packaging machine

Scope of application: This equipment is mainly suitable for industrial packaging of glass bottles/PET bottles/cans in industries such as water, beverages, beer, food, and medicine.

Applicable production line capacity range: 12,000 to 48,000 bottles/hour

Capacity range according to different packaging specifications: 30 packages to 260 packages per minute

Main component configuration:

1.Introduction to single double layer stacking half tray film packaging machine:

1).Basic parameters*

Speed:

PET bottle 550ML Can 330ML

80 packs/min 4*6 combination 90 packs/min 4*6 combination

2*90 packs/min 3*4 combination 2*130 packs/min 2*3 combination

*Installed power: 130KW

*Operating power: 105KW

*Dimensions: L21650MMxW2890MMxH2350MM

*Equipment weight: 14.5T

2).Configuration description:

*Safety door opening method: folding upper door

*Human-machine interaction interface: AB host computer

*Safety circuit design standard: PLD

*Servo motor axis number: 21 axes/Inovance

*Program framework design standard: PACKML/OMAC

*Pneumatic configuration and air circuit design: full set of FESTO pneumatic components,

*PLC type: motion controller/Inovance air source processing component with electric control valve and soft start valve

3).Functional description:

*Bottle grouping pressure control method: 8 columns of independent constant pressure control

*Bottle pushing/film picking overload protection method: Pneumatic torque overload protection device/mechanical torque limiter

*Shrinkage oven heating/circulation method: Upper electric heating, forced fan circulation

*Maximum number of shrinkage oven channels: Dual channels, single and double switching

*Shrinkage oven channel switching method: Hand wheel adjustment, no need to disassemble the middle air chamber

*Film unwinding method: Servo motor unwinding

*Chain lubrication method of the whole machine: Automatic lubrication

*Number of lubrication points: 17 points

*PE film roll centering method: manual adjustment with screw rod and digital display

*PE film roll change and splicing method: automatic splicing

*Film feeding roller pressure adjustment method: precision setting pneumatic constant pressure control

*Film cutting/feeding method: pre-cut film, vacuum belt conveyor

*Sheet base belt conveyor deviation correction method: automatic deviation correction

4).Patent number: ZL2022 30020804.3

ZL 2021 2 0662848.6

ZL 2023 2 3149571.5

2.Application Scenario for single double layer stacking half tray film packaging machine:
Single double layer stacking half tray film packaging machine is widely used in water production line, beverage production line, canned food production line, pet food production line, beer production line, liquid seasoning production line, etc.

3.Process flow for single double layer stacking half tray heat shrink film packaging machine:

conveying, sorting, grouping, film feeding, film picking rod wrapping, shrinking, cooling, finished product output.

4. Description of process characteristics for single double layer stacking half tray film packaging machine:
4.1 Simple and beautiful appearance, novel and unique structure, easy maintenance.
4.2 Pneumatic expansion supports film rolls, electronic induction film conveying, stable film feeding, quick and rapid film change.
4.3 Servo motor control system, stable and reliable.
4.4 The entrance adopts step guide plate progressive bottle feeding, and the dynamic lane division mechanism is combined with ultrasonic detection to effectively prevent bottle jams in real time.
4.5 The lengthened bottle feeding conveyor belt is conducive to the sorting of bottles, effectively increasing the number of film picking rods, reducing the linear speed of the conveyor chain, and increasing the tolerance of the equipment.
4.6 The bottle separation mechanism adopts servo combined with cam structure, and the bottle separation is accurate and reliable.
4.7 The shrinking chamber adopts unique circulating air transportation technology to greatly improve the shrinking effect. Reasonable structure, heat insulation, high temperature control accuracy, better shrink packaging effect.
4.8 ​​More than 90% of electrical components are imported high-quality brands, stable and reliable.
4.9 The whole machine adopts energy-saving technology design, saving 30% of power loss, low carbon and environmental protection.
4.10 The color mark sensor automatically captures the mark, and the servo motor controls the film feeding length and position to achieve color film positioning and improve the product packaging grade.

5. Main structure and function for single double layer stacking half tray film packaging machine:
The whole set of equipment consists of bottle feeding conveyor belt, packaging machine, heat shrink machine, non-powered conveyor roller and electrical control, pneumatic control and other parts.
(5.1) Packaging machine
The packaging machine mainly consists of frame, bottle separation mechanism, bottle pushing mechanism, film placing mechanism, film wrapping mechanism and so on.
5.1.1. The bottle feeding mechanism is responsible for conveying PET bottles to the bottle separation mechanism, which is divided into two parts: front conveying and rear conveying.
5.1.2 The bottle separation mechanism is responsible for sorting PET bottles according to packaging requirements so as to realize film pushing.
5.1.3. The bottle pushing mechanism is responsible for pushing the grouped PET bottles forward and wrapping them with film.
5.1.4. The film unwinding is responsible for supplying film to wrap the grouped PET bottles.
5.1.5. Film wrapping: The supply length of the shrink film is automatically set according to the size of the package, and the automatic film wrapping is completed synchronously during the forward movement of the product.
(5.2) Heat shrink machine
The heat shrink machine consists of three parts: heating and shrinking, cooling and shaping, and product conveying.
5.2.1. Heating and shrinking:
The shrinking machine heats and shrinks the wrapped package, so that the film shrinks evenly at the set temperature, adheres closely to the surface of the package, and wraps the package tightly to achieve the desired packaging purpose.
The temperature controller uses a digital display temperature controller with a built-in PID function. The temperature sensing is sensitive and accurate and can be set at will. During operation, the temperature of six parts in the heat shrink furnace cavity is detected by thermocouples, and the heating state of the heating tube is automatically adjusted to ensure that the heating temperature in the furnace cavity is constant within the set temperature range.
The air volume and pressure of the furnace can be controlled by variable frequency regulation. During operation, the heat of the heating tube is blown out from the two side walls and bottom of the heat shrink furnace cavity through the centrifugal fan, and acts on the wrapped product. This equipment has a total of 6 fans, each of which is composed of an extended shaft motor customized by our company and a special multi-wing centrifugal impeller. According to the running direction of the equipment, every two fans correspond to a heating zone and forming zone. According to the hot forming process of the wrapped product, the fan speed of each heating forming zone can be set by frequency conversion to achieve the required air volume and air pressure for forming.
The air volume and air outlet position in the heat shrink furnace can be adjusted at will. According to the hot forming process of the wrapped product, the air volume and air outlet position of a certain section of the heating forming zone can be adjusted by mechanically adjusting the inner wall of the furnace cavity and the bottom air volume adjustment plate.
The film package can be shared by single and double channels. This machine is used as a double-channel film package, and a hot air plate is configured in the middle of the heating furnace channel. The heat is more uniform when the double package passes through the heat shrink furnace. When used as a single channel, the middle hot air plate in the heating furnace channel needs to be removed.
Make corresponding modifications according to customer requirements.
The required packaging temperature is 200°~280°, the heating time is 30-40min, the heating tube power is 155Kw, and the outer wall temperature of the heating furnace is 30°~50°.
5.2.2. Cooling and shaping:
Cooling and shaping is responsible for rapidly cooling the film on the surface of the packaging after heating and shrinking, so that the film quickly becomes a high-strength state for easy handling.
The outlet of the heat shrink furnace is equipped with 6 sets of heat dissipation fans, and the perforated mesh belt is used for transportation, which can quickly cool the wrapping film and form a high-strength state.
5.2.3. Product transportation:
The stainless steel conveyor mesh chain has a tight and uniform mesh spacing, high mesh strength, stable transmission, and high wear resistance; the machine can be independently controlled, and the motor speed can be adjusted by frequency conversion to match the speed of the main machine of the film wrapping machine.
The fully packaged items are transported to the unpowered conveyor roller; the unpowered conveyor roller can play a role of temporary storage, which is convenient for personnel to stack or carry.

6.Technical Parameters single double layer stacking half tray film packaging machine:

7.1)single double layer stacking half tray film packaging machine configuration:

Note: The above configuration is the conventional configuration. If it is affected by the delivery cycle of the external supplier, the brand with the same configuration will be selected as appropriate. The company will not make any additional notification.

2)single double layer stacking half tray film packaging machine Configuration advantages
The main mechanism of the equipment is controlled by a servo motor, equipped with 11 servos, using double servo finger bottle separation, and the film wrapping chain is driven by the servo to achieve a perfect match between the film wrapping line speed and the equipment running speed. 11 servos can effectively improve the transmission efficiency of the equipment and achieve precise control of the equipment.

8.Quotation and delivery time for Single Double Layer Stacking Half Tray Shrink Wrapping Machine Automatic:

(1). Quotation validity period: 1 month;
(2). Payment method: T/T, L/C.
(3). Customers provide the product and packaging samples required for factory trial free of charge;
(4). Delivery time: 60 working days from the receipt of customer deposit and product packaging samples.

9. Quality Assurance for Single Double Layer Stacking Half Tray Shrink Wrapping Machine Automatic:
(1). The company guarantees that the goods provided are brand new, unused, made of the latest design and suitable materials, and meet the quality, specifications and performance specified in the technical contract in all aspects;
(2). The company guarantees that after the production line is properly guided, installed and debugged, the equipment will reach the various technical performance indicators of the product within 15 days of the entire system being put into operation;
(3). The company guarantees that within the quality assurance period specified in the contract, it will be responsible for defects, failures and damages of the production line caused by defects in the design, process, manufacturing, installation, debugging or materials provided and the quality of the seller's equipment;
(4). The equipment quality assurance period is 12 months after the acceptance of the production line. If during the quality assurance period, it is found that the quality or specifications of the equipment do not meet the contract provisions, or it is proved that the equipment is defective (including potential defects or the use of unqualified materials, etc.), the buyer has the right to propose rectification to the seller within the product quality assurance period according to the inspection certificate issued by the statutory department;
(5). The company guarantees the mechanical properties of the equipment provided, the quality of the product and the consumption indicators of the product.

10. Equipment warranty for Single Double Layer Stacking Half Tray Shrink Wrapping Machine Automatic:
(1). After the equipment is accepted, a 12-month warranty is provided, and the control system (standard Huichuan brand) provides a 24-month warranty; during the warranty period, our company will provide users with free spare parts and timely and effective services (wearing parts are not covered by the warranty);
(2). If the equipment fails and needs to be repaired on site, our company guarantees that the maintenance personnel will rush to the customer's site within 48 hours to help the customer eliminate the fault in time (except for force majeure);
(3). After the warranty period, our company will provide users with a wide range of preferential technical support, sufficient spare parts supply and other after-sales services for life;

11. Packaging and transportation for Single Double Layer Stacking Half Tray Shrink Wrapping Machine Automatic:
(1). Packaging method:
The packaging uses new and sturdy special packaging boxes or fixed frames, which are suitable for long-distance transportation, moisture-proof, rust-proof, shock-proof, suitable for land transportation, sea transportation and overall lifting.
(2). Transportation method: land transportation, sea transportation.