What is Pop Up Basin Waste

Installing a pop-up basin waste is generally a straightforward process, but it does require some basic plumbing knowledge and tools. Here's a step-by-step guide to help you install a pop-up basin waste:

Tools and materials you'll need:

• Pop-up basin waste kit (usually comes with the stopper, rod, and other necessary components)
• Adjustable wrench or basin wrench
• Plumbers putty or silicone sealant
• Towel or cloth
• Bucket or container
• Pliers

Step-by-step installation:

1. Preparation:

   • Before you begin, make sure you have turned off the water supply to the sink.
   • Place a towel or cloth underneath the sink to catch any water that may spill during the installation process.
   • If there is an existing drain assembly, remove it by unscrewing the nut holding the old drain in place. Use pliers if necessary.

2. Assemble the pop-up waste:

   • Take the pop-up basin waste kit and assemble the stopper and rod according to the manufacturer's instructions. This usually involves attaching the rod to the bottom of the stopper.
   • Ensure that the rod is at the correct length to operate the pop-up mechanism from the faucet or the lever at the back of the faucet.

3. Apply plumber's putty or silicone sealant:

   • Take a small amount of plumber's putty or silicone sealant and apply it around the underside of the flange of the pop-up waste.
   • Insert the pop-up waste into the sink's drain opening from above, ensuring that the stopper faces the correct direction.

4. Secure the waste assembly:

   • Underneath the sink, screw the nut onto the threaded tailpiece of the pop-up waste to secure it in place. Use an adjustable wrench or a basin wrench to tighten the nut snugly. Be careful not to overtighten, as it may damage the sink or cause leaks.

5. Connect the lift rod or lever:

   • If your faucet has a lift rod at the back, attach the rod to the pop-up waste's horizontal arm.
   • If your faucet has a lever, connect the lever to the pop-up waste's horizontal arm.
   • Adjust the length of the rod or lever as needed, so it operates smoothly.

6. Check for leaks and proper operation:

   • Turn on the water supply to the sink and test the pop-up waste by operating the faucet. Check if the stopper lifts and seals the drain properly.
   • Look for any leaks around the pop-up waste and the connections. If you notice any leaks, tighten the connections or reapply some plumber's putty/sealant if necessary.

7. Clean up:

   • Wipe away any excess plumber's putty or silicone sealant from around the drain flange.

And that's it! Your pop-up basin waste should now be installed and ready to use. If you encounter any issues or difficulties during the installation process, it's a good idea to seek help from a professional plumber.

Package Detail

OEM Logo Polybag, Colour Boxs, Colour Master Carton

• FAQ

Q: How long is your product guarantee period?
A: We have Two years guarantee and 24 hours full-time service.

Q: What is your MOQ?
A: Normal Each Items 3000pcs MOQ.

Q: Can you accept OEM,ODM?
A: we accpet OEM.

Q: How long is your delivery time?
A: 30-35 days After Confirm Order