Manure Separator Equipment Screw Filter Press Solid Liquid Separator For Urban Manure

Manure Handling System Solutions

The first step is to mechanically filter the slurry material through the sludge receiving device, and the process consists of simple filtration and sand removal filtration.

The second step is to carry out continuous mechanical dewatering treatment of the slurry material through the screw press dewatering machine.

The complete mechanical pretreatment is completed by the first two steps. Although the treated filtrate still contains a large amount of dissolved pollutants, it can be directly discharged into the urban sewer system under normal circumstances.

Parameters

Integrated Separator

>Structure and function

The device is designed according to the characteristics of domestic manure slurry.

It is composed of sand settling box, sand conveying screw and sand lifting screw, which integrates slag removal,

The functions of sand settling, sand extraction and screening slag dewatering are integrated, and the structure is compact.

nice appearance.

>Equipment Features

The equipment is all made of stainless steel, and the whole machine has a long service life.

The submerged bearing adopts sand-proof and wear-resistant bearing, which is maintenance-free for life.

The solid content of slag discharge can reach more than 40% DS, for fine sand above 0.2m

The removal rate is over 90%.

The device has a closed design, no odor leakage

It has been tested by the market for a long time, and nearly 200 devices are in normal operation in China.

>Equipment Specifications

Main drum diameter: 500-1000mm

Grating pitch 6-12mm (specifically determined according to the nature of the feed)

Processing capacity: >100m3/h

Closed Sludge Dewatering Equipment

>Structure and function

The closed sludge dewatering equipment is mainly used for the pretreated manure slurry

Dehydration, fully airtight design, consists of casing, dynamic and static rings, extrusion screw, drive motor, and flushing device.

Mainly used for dehydration of manure slurry after pretreatment, and solid content of manure residue after dehydration

It can reach more than 40% DS, the slurry COD is reduced by more than 90%, and the SS is removed.

Except for more than 95%.

>Equipment Features

Sophisticated manufacturing process, the whole machine is made of stainless steel and subjected to pickling and passivation treatment.

The structure design is strict, the running speed is low, the noise is small, and the mechanical operation is stable.

Fully sealed design, no odor leakage;

The total installed power is small, the frequency conversion control operation, and the power consumption is low;

The mechanical speed is extremely low, and there is almost no maintenance cost.

Equipment Specifications:

Processing capacity: 15-20m3/h

About Us