Product Description:

BLDC Driver Board: 12-36V Operating Voltage, PWM Duty Cycle 0-100%, PWM Frequency 1-20KHz

JYQD-V6.3E2 BLDC Driver Board is a DC Brushless Motor Driver Board which can control the speed range from 0-100%. With a wide operating voltage range of 12-36V, it offers excellent speed regulation accuracy of ±0.5% and a speed regulation range of 1:100. It is highly reliable and suitable for applications such as industrial automation, robotics, and medical equipment. The product offers superior performance for BLDC motor control and is very easy to use. It is also equipped with advanced features such as over-current protection, short-circuit protection, and over-temperature protection.

Features:

• Product Name: DC Brushless Driver Board
• Speed Regulation Accuracy: ±0.5%
• Speed Control Range: 0-100%
• PWM Duty Cycle: 0-100%
• PWM Frequency: 1-20KHz
• Driven Motor Type: Direct Current Brushless Motor

Applications:

The JUYI JYQD-V6.3E2 BLDC Driver Board is ideal for a wide range of applications. This DC brushless driver board provides maximum current of 15A and has a speed control accuracy of ±0.5%. The speed control range is from 0 to 100%. With its direct current brushless driver board technology, this brushless DC driver board is perfect for applications such as motor control, robotics, automation, and more.

The JYQD-V6.3E2 BLDC Driver Board has been designed and manufactured by JUYI to ensure the highest quality and reliability. It features a wide speed control range, high speed control accuracy, and robust design.

The JYQD-V6.3E2 BLDC Driver Board is a perfect solution for applications such as motor control, robotics, automation, and more. It provides high speed control accuracy, wide speed control range, and robust design. With its advanced direct current brushless driver board technology, this brushless DC driver board is ideal for applications requiring high performance and precision.

Technical Parameters:

Customization:

Wring diagram

1. Control port

Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

GND—Used for Drive board internal control

5V -----Driver board internal output voltage

Signal ---- Motor speed pulse signal output port, 5V pulse signal.

2. Power port

MA ----motor phase A

MB ---- motor phase B

MC---- motor phase C

GND----DC-

VCC----DC +

3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
4. Control port distance: 2.54mm,Power port distance:3.96 mm
5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.

Dimensional drawing

Support and Services: