Heavy duty plastic multi color wall mounted type outdoor stadium seats

Feature of outdoor stadium seats

1.The design, selection and installation of the seat are in line with the stadium design, beautiful, comfortable, safe, durable, and easy to install, maintain and manage. The chair surface adopts the hollow blow molding manufacturing process, and selects high-density polyethylene (HDPE) to be processed at one time. It has rounded edges and corners of the seat surface, relatively concentrated molecular weight, high bonding strength at the junction, high rigidity and toughness, and good mechanics Performance and higher use temperature, good aging resistance, impact resistance, high and low temperature resistance, and oil resistance. Polyethylene (HDPE) has little water absorption, is non-toxic, and has excellent chemical stability.

2. The seat adopts front-mounted installation, and the parting surface and expansion bolt installation are fully considered in the design, so as to avoid the exposure of the seat fixing bracket and fixing screws. Fastened on the steps with special fasteners, each fastener can withstand a tensile force of 1500kgf (C25 concrete). The length of the fixed bracket shall not be less than 210mm, the width shall not be less than 45mm, and the thickness shall not be less than 2.5mm.

3. Seat color: computerized color matching, bright colors, and brisk colors. In the process of seat production, the added color stabilizer ensures that the color of the seat is durable and bright, and the color consistency of the seat reaches 95% within five years. Appearance color discoloration rating test conducted by the national furniture inspection center, the inspection result is qualified.

4. Determine the raw material formula according to the user's needs to ensure that the weather resistance requirements of the seat in different environmental conditions are met. After the national furniture inspection center conducts the surface heat and cold cycle test, there must be no obvious color changes and no cracks on the surface.

5. The plastic chair surface must not contain soluble heavy metals. After the national furniture inspection center has tested the content of soluble heavy metals, heavy metals such as lead, cadmium, chromium and mercury shall not be detected.