Description

1. Travel scope can be adjusted.

2. Alu Alu Blister Packaging is available for this machine.

3. Mould is located by locating groove which makes it easy to change mould. The machine heats the PVC through conduction and forms it through pressing and frothing.

4. The material is fed automatically. The mould and feeder can be designed as user’s requirements.

5. Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller, it can synchronize accurately.

6. Adopt the equipment of trace pressing, batch number printing and scarp-collecting.

7. Stepping motor Pulling Material more accuracy and easy adjusting

8. The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life.

Applications

This machine is our engineer update based on DPP-160Fmodel and our clients' feedback infomation,and fetch in advanced technology from aboard .Strickly improve it according to GMP standard.A waste material collecting device has been designed to this machine which can make its function much perfect.

Adjustable stroke:freely change the size of sheet and suitable for productioln of various kinds of specifications.

Flat-plate framework :It is suitable for pack any kind of shape ,such as square ,triangle.oval and etc.

Positive press forming : makes the bubble's symmetrical ,upright,and make the finished products much perfect.

Specifications

Competitive Advantage

1. All of the air supply and synchronization of the machine is controlled by the encoder. All synchronous data have been programmed in advance so that there is no need to adjust air supply and pulling time manually. The machine in other factory use Cam control, which means the process is mechanical. The biggest disadvantage of it is that the friction is inevitably which will lead to wear and tear. As time passes, the synchronization is not accurate. But our machines use encoder control, so that there is no need to worry about the synchronization. If the encoder is broken, you can also buy it in the local, it’s convenient.
2. Our machine use Stepper motor to control the pulling length. When change the model, there is no need to adjust the machine so that it’s convenient and easy operating. What I want to mention is that the machines in other factory use gas clip to control the pulling length. It has two shortcomings. First, when you change the models, you need to adjust the pulling length manually which means adjusting screw in the pulling position. If the Operating workers is unskilled, it will waste the material and time.
3. Our machines have PRC (print register control) system, is the cursor version of function, because the machine is a stepper motor, so is true of PRC system forever won't generation shift. Other manufacturers may be gas clip can only be manually adjusted, a long time after the shift will occur.