Fire Resistant Interior Composite Partition MGO Board Production Line

Product Description:

1. Production Line
Mgo board making machine can produce all kinds of magnesium oxide boards, they can be used for ceiling, wall skirting,

decorating of indoor wall and lining board for furniture. It can replace three-ply board, five-ply board, flake board, MDF

(Medium Density Fiberboard ) and Gypsum Board. It is really environment product and lower cost.
2. Raw material and cost analysis
The product is formed with crushed crop straw or sawdust and some inorganic chemical materials at one time after

roller-extruding. The source of raw materials is widely and they are purchased easily for customers.
3. Technology features
There is not any requirement about high temperature and high pressure during production processing. The board will

be formed at one time after roller-extruding under the conditions of normal temperature and normal pressure. This is

a green environmental-protection project, because that there is no waste water, waste materials and waste gas during

its production processing. The finished board doesn't need high temperature drying, air-drying and watering, and under

the normal temperature, they will dry well indoor.
4. Equipment Model and Product Specification
According to different production, our equipment has 6 models for large-scale, middle-scale and small-scale. Our all

equipment can produce board with same quality and specification but different production.
The board with the thickness of 2-60mm, the biggest width of 1, 300mm and unlimited length. So you can adjust the

thickness of board at will. The standard specification of the board is 1.22mX2.44m.

Mgo board specifications:

MgO Board performance:
A. Oxygenic index%: >90
B. Level combustion: SO
C. Vertical combustion: SO
D. Water content rate: 10.9%
E. Capacity: 1.15g/cm3
F. Static bending intensity: 169.46Mpa
G. Density: T/ m3 1.13
H. Water resistance: Without chalking for 24 hours and there is no change on surface
I. No “Three-wastes” (waste water, waste gas and waste residue), no pollution and environmental protection

Our Service

Pre-Sales Service
* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.

Company Information

The company was divided into R&D center of plasterboard equipment ,manufacturing

base and machinery Import & Export company. Our products are exported to Asia,Europe,and Middle East etc.

LVJOE has 300 employees, including 6 professor senior engineers, over 40 of senior technical staff,Our core

product:plasterboard production line(also known asdrywall production line, paper faced gypsum board production line),

gypsum ceiling board equipment and laminating machine of various materials.