Infrared Body Temperature Checking Scanner Walk Through Metal Detector Door Price

Function introduction Sensing probe: Our thermal infrared imaging probe has the advantages of high sensitivity, high pixel, high resolution and array imaging compared with ordinary infrared receivers on the market

Passing rate:Normal slow walking through, face side view indicator light, passing rate ≈ 40-60 people / min

To prevent missing inspection: The product design conforms to the ergonomics, which can ensure that the subject can not avoid the probe and avoid the inspection

check the accuracy:The test results can be accurate to two decimal places. In normal room temperature, the temperature error is ± 0.5 ℃; in stop stop mode, the temperature error is ≤± 0.3 ℃

Irradiation angle:Large area inspection

system function:Through the green light of the number of people, the red light of the alarm in case of high temperature, and the number of people recorded

Audible and visual alarm:When the subject's temperature is abnormal through the temperature measurement door, the red signal light flashes and a sound prompt is given to the test staff. The number of alarms can be stored.

Intelligent statistics:Intelligent passenger flow and alarm counting function, can automatically count the number of people passing and the number of alarms Very low consumption:Less than 13W under normal working power

Detection height: The probe can be moved up and down to adapt to different heights and different age groups

parameter settings : The main parameters such as sensitivity, accuracy, and compensation temperature can be adjusted according to customer use scenarios

Working mode: ① Normal passing mode; ② Slow side mode; ③ stop mode

Detection distance:<50 CM

Technical parameters