Axial Inlet Type Industrial Cyclone Separator For Boiler Power Dust Collection
Product Description
Cyclone separators are commonly used for separating dispersed solid particles from gas phase. These devices have simple construction; are relatively inexpensive to fabricate and operate with moderate pressure losses. Therefore, they are widely used in many engineering processes such as dryers, reactors, advanced coal utilization such as pressurized and circulating fluidized bed combustion and particularly for removal of catalyst from gases in petroleum refinery such as in fluid catalytic cracker (FCC).
Name | Type |
Figure (a) | Tangential inlet,axial discharge. |
Figure (b) | Tanential inlet,peripheral discharge. |
Figure (c) | Axial inlet,axial discharge. |
Figure (d) | Axial inlet,peripheral discharge. |
Operation
The driving force for particle separation in a cyclone separator is the strong swirling turbulent flow. The gas and the solid particles enter through a tangential inlet at the upper part of the cyclone. The tangential inlet produces a swirling motion of gas, which pushes the particles to the cyclone wall and then both phases swirl down over the cyclone wall. The solid particles leave the cyclone through a duct at the base of the apex of the inverted cone while the gas swirls upward in the middle of the cone and leaves the cyclone from the vortex finder. The swirling motion provides a centrifugal force to the particles while turbulence disperses the particles in the gas phase which increases the possibility of the particle entrainment.
Characteristics
7. High efficiency over a broad flow range.
8. Flow-optimized design.
9. High safety during operation under pressure.
10. Long-term corrosion protection.
Quality Control
1. Fabrication area of 200,000 square meters
2. 150 Engineers
3. 600 Coded welders
4. 60 Licensed Inspectors(NDT Level-III instructors)
5. Class-A Licenses for Design and Manufacture Boiler
6. ISO 9001:2008 Quality System
7. ASME Certificate of Power Boilers
8. ASME 'S','U' and NB stamp authorization
Company Introduction
Established in 1985,Zhangjiagang Hua Dong Boiler Co.,Ltd.(trading as HD Boiler),produces power plant; industrial; waste heat; waste incineration; biomass; organic heat carrier and electric steam boilers. Coupled with a comprehensive range of heating surfaces, HD Boiler brings to the market a unique service including boiler design , fabrication, installation, maintenance and replacement of boiler pressure parts.
1. Fabrication area of 200,000 square meters
2. 80 Engineers
3. 200 Coded welders
4. 30 Licensed Inspectors(NDT Level-III instructors)
5. Class-A Licenses for Design and Manufacture Boiler
6. ISO 9001:2008 Quality System
7. ASME Certificate of Power Boilers
8. ASME 'S','U' and NB stamp authorization