Stainless Steel Seamless Pipe, NACE 0175 / 0103, ASTM A312 / ASME SA312 TP347 / TP347H, ET/HT/UT​ Corrosion Resistance

SIZE RANGE :

MAIN STEEL TYPE AND GRADE :

MAIN PRODUCTION STANDARDS:

Stainless Steel Seamless Pipe:
1. A312: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A312
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A312, include “Logo(YHSS)+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T”
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8. MTC: BWSS Official Original MTC paper will be supplied for each order.

Quality Control in our group :

Application:

• Food processing equipment, particularly in beer brewing, milk processing & wine making.
• Kitchen benches, sinks, troughs, equipment and appliances
• Architectural panelling, railings & trim
• Chemical containers, including for transport
• Heat Exchangers
• Woven or welded screens for mining, quarrying & water filtration
• Threaded fasteners
• Springs
• Others