Low torque High speed high pressure rotary joint hydraulic swivel joint for water

Main Feature:

Highly heat radiation resistant structure to be used especially for steel making and continous casting rollers.

Anti-vibration X-ring design for excellent service lift.

Internal lubrication groove to be pre-filled with lubricants to be free from constant lubrication.

Imported anti-wear square ring design to keep impurity away from sealing surface.

Highly corrosion resistant material for prelonged operation under water enviroment.

Low torque High speed high pressure rotary joint hydraulic swivel joint for water

Benefits:

1. High-temperature,high-pressure resistant rotating pipe coupling

2. Rugged-construction unions suitable for high pressure, high temperature thermic oil, steam

3. The seal is imported from Germany, which guarantee the excellent performance of our rotary union.

4. The design of detachable baseplate structure is convenient for the conversion between single and multi-passsages

5. The use of graphite pallet balance the compensation of spring, hence it avoids the spring being corroded and prolongs the service life.

6. Ideal for thermal oil and for considerably higher pressures, temperatures

7. Hosing made of ductile cast iron and cover&rotor made of chrome steel

8. Have high temperature resistant spring

Drawing:

Applications:

• Paper Machinery

• steel, corrugating, textiles,

• Dyeing, Rubber, Plastics, Chemical,Machine tool

Installation Instructions:

Your Rotary Systems rotary union is a precision component which, when installed properly, will provide a long, leak free life. Please follow these general guidelines when installing your union:
Connections
Rotary Systems unions should always be installed using flexible connections. To avoid damage to the bearings, the union needs to find its center during operation. It is imperative that either the shaft or the housing is not hard-piped.
The housing of the union should be held in a vise and the flexible connection should be installed before installing the union to the machine.
Clean female threads and face of shaft prior to installation. Use Teflon pipe tape or pipe sealant on NPT threads. As a guideline, NPT threads should be hand tight plus 1- 3 turns to seal the threads. When installing parallel threads, appropriate gaskets or o-rings should be used.
There should be a slight, kink-free curve in the hose when installed on the equipment. It is essential the housing or shaft is allowed to float to compensate for any eccentricities and/or misalignment.

Anti-rotation
In many instances, the flexible hose connections are used for anti-rotation. Other applications require an external device for anti-rotation such as a fork around the fittings, pin, yoke or bracket. Anti-rotation devices need to “float” to prevent damage to the union.
Filtration
To prevent damage to the shaft or the seals, Rotary Systems requires filtration to 10 microns or less. Failure to do so may invalidate your warranty and cause premature failure.
Lubrication
If your union has grease fittings, lubricate union with no more than two pumps of appropriate grease per fitting.

Jarch main products:

1. Fiber optic rotary joint series

2. Through bore slip ring series

3. Electro optical slip ring series

4. Hybrid slip ring series

5. Pneumatic rotary joint series

6. Hydraulic rotary union series

7. Capsule slip ring series

8. Pancake slip ring series

9. High current slip ring seriels

10.High speed slip ring series

11.Thermocouple slip ring series

12.Miniature slip ring series

13.Wind turbine slip ring series

14.Ethernet slip ring series

15.Explosion proof slip ring series

16.Mercury slip ring series

Why to choose JARCH slip ring?

JARCH Company is a professional slip ring manufacturer in Shenzhen, China. JARCH has become one of the best-known Chinese brands in the world for high quality slip rings and first-rate services. Since we were founded in 1998, we have been committed to innovating, developing and manufacturing high quality slip rings and providing perfect rotation solutions for customers around the world.
With more than 19 years' experience in the field, JARCH has established long term business relationships with transnational corporations, research institutes, military-industry departments, famous universities as well as a lot of companies in various industries at home and abroad.
We specialize in custom slip rings solutions tailored to meet your project's requirements for performance, testing, qualification and delivery. Our teams understand the importance of comprehensive project planning ensuring your project's success.

Can't find the right slip rings solution?

At JARCH Company, we strive to meet the needs of our customers. If an assembly from our standard model does not fit your requirements, our design team will work with you to design a slip ring assembly that will meet your company's exact needs. With over 19 years of experience JARCH has amassed over 10,000 drawings, thousands of custom slip ring designs and experiences supporting customers worldwide.

FAQ