ERIKC 0445110466 Bosch Diesel Jet Fuel Injector 0 445 110 466 Bico Auto Parts 0445 110 466 for JAC HF4DA1-2C

1 injector detail

2 injector picture

3 injector FAQ

FAQ: What does “remanufactured” mean?

ERIKC Answer: Remanufactured does not mean “used” or “rebuilt”. It means that the part has been manufactured again. 100% of all parts are examined and the non-wearable parts – such as the injector body – are re-used. However, if there are any flaws, the part is discarded. The injector is rebuilt and all wearable components are replaced. The part is then tested before completion. The extent of the remanufacturing and testing process depends on the manufacturer

FAQ: What type of fuel can I use in my injector?

ERIKC Answer:Typically you can use just about any fuel in today’s injectors (see 2150cc exception below). While the injector will operate normally with just about any fuel, you do have to take some precautions with certain fuels.

FAQ: Why do I have a resistor pack in my car?

ERIKC Answer:There are quite a few aftermarket ECUs (although not all) that will be able to provide both saturated and peak and hold injector drivers. Make sure you set your ECU to match the type of injectors you purchased!

FAQ: What is base fuel pressure?

ERIKC Answer:Base fuel pressure is typically referred to as the pressure to which the fuel pressure regulator will set the start and idle fuel pressure in a particular fuel system.

Base pressure is important to us in the fuel injector industry and to tuners, since it is one of the factors that we use to define flow rate of the injectors, which in turn is something the ECU has to know to correctly meter the fuel delivered to the motor.

4 Contact way

Joe (Manager) ready to reply to your messages