ERIKC FOOVC30319 diesel pump injector solenoid valve FOOV C30 319 bosch auto truck injection parts FOOV C30 319

Solenoid Valve Introduction

^-^ --------- Solenoid Valve Picture

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand "HAOTENG" and "DYD", we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).
​

Injector FAQ

FAQ: Reasons of temperature variation:

ERIKC Answer:It is going to require the use of some effective diagnostic tools to assess the degree of problems, if any, that a fuel injector is experiencing. A leak from the fuel injector will cause the exhaust manifold to register high temperatures. Low temperatures are the result of the injector valves not opening properly. A laser thermometer can determine the temperature of the exhaust manifold. An engine stethoscope will allow a person to determine problems by listing to the fuel injectors directly. If there is not a sharp, clicking sound, there may be a problem that is either existing or developing. A final inspection can be removing the fuel injectors and doing close examination. This can identify cracks in the injectors.

FAQ: What are the reasons for black smoke?

ERIKC Answer:Intake factor

Insufficient intake air

Insufficient intake air, low intake air, and the injected fuel can not be completely burned, it will form black smoke. Commonly caused by the intake system, the black smoke has such characteristics: normal idling, black smoke with load operation; insufficient intake air The idling and low-load operation is normal. When the load increases, the air volume cannot change with the amount of fuel, and the air-fuel ratio is changed, causing the mixture to be too concentrated, resulting in black smoke. The intake air volume, intake air temperature, etc., can be read on the diagnostic instrument. Common faults are as follows: