High Technology Used Plastic Injection Molding Machine With 24 Hours Working

Brief Introduction for Used Plastic Injection Machine

(1) Screw of a large L/D ratio and adjustable backpressure ensure plasticizing quality and capacity;
(2) The screw is directly driven by a low-speed, high-torque, radial piston hydraulic motor, applying to all kinds of plastics;
(3) Multi-stage injection speed and holding pressure apply to various complicated molds and processing requirements;
(4) High strength mould plate and double-toggle five-point clamping mechanism, rapid and smooth mould-moving, reliable mould-locking;
(5) Large mould can be accommodated due to the increase of the mould opening stroke, the mould thickness and the space between the tie bars
(6) Low-pressure, low-speed clamping protection device and the alarms for various faults
(7) High strength tie bars with perfect rigidity and endurance

Outsourcing power requirement for Used Plastic Injection Machine

• Power source 3N+PE 50Hz 380V/220V (Three-phase five-wire)
• Subject to adjustment according to the end-use country
• Compressed air 1MPa Automatic plastic bottle cap making machine.
• Cooling water pressure 0.3-0.4MPa
• Water consump. for molds 4.2m³/h (10 )
• Water consump. for hyd. sys. 6.6m³/h (15 )

Machine Feature for Used Plastic Injection Machine

1 Enhanced clamping mechanism to meet requirements for efficient production.

2 Excellent clamping features with optimized linkage mechanism to have faster and smooth operation.

3 Professional plasticizing unit is applicable for production of various raw materials, and to improve plasticize performance significantly.

4 Excellent injection performance with twin-cylinder injection mode, have more reliable and stable performance.

5 Professional platen optimization, the platen after finite element analysis and optimization has high rigidity and strength.

6 Centralized lubrication system with reliable protective configuration, quantitative distribution and centered lubrication, provide more professional lubrication protection and extend mechanical life.

7 New frame type structure, simple and clean appearance, with more reasonable stress on machine body and high rigidity.

Injection molding machine include for Used Plastic Injection Machine

1) LCD computer control with big display screen
2) Hydraulic double proportional valve
3) Hard chrome plated high tensile strength steel tie bars
4) Generous space for fitting large moulds
5) Large opening stroke
6) Two position transducers to control Clamping and Injection
7) Four stages of injecting, independent velocity and pressure control
8) Hydraulic mould height adjustment device
9) Screw cold-start prevention device
10) Melt decompression control
11) Screw back pressure control
12) Multiple hydraulic ejection
13) Differential high speed clamping
14) Centralized lubrication system
15) Low pressure mould protection device
16) Mechanical safety interlock
17) Double electrical safety interlock
18) Oil return filter
19) Oil tank with inner stainless steel container