Table Top Plastic Bottle Preform Injection Moulding Machine

(1) Screw of a large L/D ratio and adjustable backpressure ensure plasticizing quality and capacity;

(2) The screw is directly driven by a low-speed, high-torque, radial piston hydraulic motor, applying to all kinds of plastics;
(3) Multi-stage injection speed and holding pressure apply to various complicated molds and processing requirements;
(4) High strength mould plate and double-toggle five-point clamping mechanism, rapid and smooth mould-moving, reliable mould-locking;
(5) Large mould can be accommodated due to the increase of the mould opening stroke, the mould thickness and the space between the tie bars;
(6) Low-pressure, low-speed clamping protection device and the alarms for various faults;
(7) High strength tie bars with perfect rigidity and endurance

Injection unit:

1) Four injection pressures and speeds with three additional pressures and speeds

2) Suck back function

3) Cold start protection

4) Pre-suck back function

5) Linear displacement transducer accurately monitor injection position, providing optimum. injection accuracy and control

6) Temperature control

7) Heating Status indication

Clamping unit:

1) Three clamp close and open pressures and speeds

2) Mold protection function

3) Hydraulic ejector stroke controlled by transducer

4) Automatic hydraulic die-height adjustment driven by planetary gears system

5) Adjustable support under moving platen

6) Automatic high pressure toggle lubrication with low oil level alarm

7) Mechanical, electrical and hydraulic safety interlock devices

8) Linear displacement transducer controls clamping position

Other parts:

1) Independent core in / out pressure and speed

2) Hydraulic unscrewing sequence

3) Hydraulic oil high temperature alarm

4) System pressure gauge

5) Shot counter and reset function

6) Malfunction alarm light

7) Self-diagnostic function

8) Emergency stop buttons placed both front and rear of the machine to provide easy access

Our company is a hi-tech designing and manufacturing enterprise, which is specialized in beverage production and packing complete lines as well as various water treatment machines. We are one of the earliest companies engaged in manufacturing liquid filling and packing equipment in China. Our products include: Liquid filling machines (water, fruit juice/tea, carbonated drink, oil, alcohol, plant protein drink, etc. ), Barreled filling line (3-5 gallon) Water treatment machines, Labeling & packing machines, semi-automatic /full automatic bottle blowing machines, and injection molding machines.

We can provide the single machine or production line as below:
1. Drinking water filling machine or complete production line.
2. Juice / Tea filling machine or complete production line.
3. Carbonated Drinks filling machine or complete production line.
4. 3 &5 Gallons bottle water complete production line.

5. Wine/alcohol Glass Bottle filling machine or complete production line.

The sample service

1. we can send you the video of the running machine.
2. you are always welcome to come to visit our factory, and you may see the operation of the machines here . We will make the arrangement to pick you up when you come .
3. If we get the permission of the customer who has brought the machines from us ,we can tell you their contact information, you can go to visit their factory.

Customized service
1. we can design the machines according your requirements(material ,power,filling type,the kinds of the bottles, and so on).
2. at the same time we will give you our professional suggestion .

After-sales service
1. we will provide the bill of load on time to make sure you can get the machine quickly
2. when you finish the Preparation conditions ,our engineer will go to your factory for the installation, testing and also training .
3. we provide one year warranty with spare parts free.