POU Water Dispenser 106T-GS Drinking Water Coolers with cup sensing taps

Touchless water dispenser

Touchless water dispenser is built with cup sensing taps (infrared sensing technology). It could notice the approaching of cups as well as hand. It could avoid indirect contact among users to prevent people from cross-infection against all kinds of virus. At the same, since it could also notice the approaching of hands and other objects, your may worry about the risks of hot burning. You don't need to worry about that as all our touchless water dispenser are built with safety lock system. 105 serial machines are built with a mechanical lock while 106 series are built with dual sensing protection system.

Specifications:

Some tips on operation and maintenance of 106T-GS touchless water dispenser

(1) The machine should be handled with care. When moving the compressor cooling water dispenser, it should be kept upright as much as possible. If it is to be tilted, the tilt should not be greater than 45 degrees, and it should be static for a period of time after transport.
(2) When using the water dispenser for the first time, clean the containers and pipelines of the water dispenser with clean water, then unscrew the drain valve, and tighten the drain valve after draining the remaining water in the dispenser. After adding a large bottle of water, turn on the hot water faucet, plug in the power supply and turn on the heating switch after the water flows out to avoid dry burning and prolong the life of the machine.
(3) If the water dispenser is not used for a long time, please turn off the machine switch and unplug the power plug, then unscrew the drain valve, drain the remaining water in the machine, and then tighten the drain valve (please be careful of hot water burns during draining).