CCS Wire Production Line Copper Electroplating Machine

1. Main technological parameters of copper-coated steel electroplating machine.

2. Technological process of production.
pay off→cathode discharge oil→water rinsing→anode discharge oil→water rinsing → pickling→ water rinsing → pre-plating copper → water rinsing → acid copper plating → water rinsing → hot water rinsing → drying→take up

3. Main process introduction.
Cathode discharge oil: remove the oil on the surface of copper wire to ensure the binding force of the coating .
Anode discharge oil: same as the cathode discharge oil.
Pickling: remove the oxide from the surface of the product.
Water rinsing: clean the product thoroughly after the tank to avoid mutual contamination of the tank.
Pre-copper plating : as a pre-coating, to ensure the subsequent coating and base binding force.
Acid copper plating : thickened copper coating to increase conductivity.


4.Product application
4.1. The central conductor of a communication cable
4.2. Shielded braided wire for communication cables
4.3. Pin lines for electronic components
4.4. Twisted ground wires and electrified railway lines
4.5. Thread for other decorative or corrosion protection purposes.

5.​ Packaging & Shipping
We can pack it by pallet, or according to the customers' specific requirements.

Port: Shanghai/Ningbo

6. Our Services
In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Correct technological process control
(4) Remove simple problem
All the electroplating machine of our company have already been widely used in electroplating area.

Any doubt please contact us.