SAE J1401 1/8 Motorcycle Stainless Steel Braided AN3 3.2x7.5mm PTFE Nylon Brake Hose assembly
Description:We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important. We ask that you contact us immediately before giving us
Neutral or negative rating so that we can satisfactorily address your concerns, which is impossible
Solve problems we don't know about!
Type name: AN3 Hose with Removable banjo fittings
Banjo diameter is 10mm, Length is 400 - 2400mm to choice, Braided Hose have 3 layer, inner
layer is , middle layer is stainless steel, outside is pvc.
Application: Fuel hose, turbine oil line hose, brake hose, hydraulic hand brake hose, suspension
fluid, oil storage hose.
Character:Low expansion coefficient; Aging resistant;corrosion resistant; high and low temperature
resistance. the inner O-ring is designed for brakes, fuel, motor oil, and gear oil.
Feature:
1. Adopted superior quality with racing performance, it is with extremely low frictional properties
and low permeability, and it is non-flammable and solvent resistant as well.
2. Light weight body with stainless steel braided layer, It is an inner pressure resistant hose and
very durable in use.
3. With carbon steel connector, it creates a good connections.
4. It is easy to install and direct fit with two M10 ends(10mm installing hole).
5. Different length available, please chose according to your needs.
6. Universal fit for most motorcycles, so please confirm your motorcycle brake lines size first
before the bidding.
Others: Perfect fit and no modification is needed, no install instructions includ.
Note:
1.We provide clear pictures, measurements where possible. Please check as much as possible to
make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly
different from the real object. Please take the real one as standard.
4.Instruction is not included.Professional Installation Is Highly Recommended!
Product Name | Material | Size | Specification |
BRAKE HOSE ASSEMBLY | Stainless steel braid brake hose assembly | 3.2*7.5MM | 1,Auto crimping Machine 2,Pressure test plece by plece
|
BRAKE HOSE ASSEMBLY | Rubber brake Hose Assembly | 3.2*10.5MM | 3,Skilled Workers 4,5000pcs/Day |
NYLON BRAKE HOSE | Modified Nylon inner Hose | 3.2*7.5MM | 1,201 Stainless Steel Wire |
NYLON BRAKE HOSE | PA 12 Recycled Black Nylon inner Hose | 3.2*7.5MM | 2,Burst Pressure :53Mpa |
NYLON BRAKE HOSE | PA 12 Recycled White Nylon inner Hose | 3.2*7.5MM | 3,Work Temp:-20~80 |
PTFE BRAKE HOSE | Japan Dakin PTFE inner hose | 3.2*7.5MM | 1,Best Quality PTFE inner hose |
PTFE BRAEK HOSE | China Brand PTFE Inner Hose | 3.2*7.5MM | 2,304 Stainless Steel Wire |