100%P Two-tone Recycled Plastic Bottle Fabric Ribstop With TPU Transparent Membrane Waterproof For Outdoor Wear
1 . Descriptions:
This fabric is one kind of cation fabric. It is woven by recucled fiber . This makes the fabric looks different from the rest out of the ordinary . And we finish it with TPU membrane so that it is windproof .The fabric is commonly used in mountaineering wear because this fabric has special two-tone look .
Also ,we can do other finishing if you want to obtain its functions , just like cire ,bonding or tricot. After this , it can be made waterproof and windproof . This fabric is always used to product winter wear ,sports wear and etc.
2 . Specifications:
Name : Recycled Cationic Fabric
Material : 100% P
Yarn Count : 30*30
Weight :61 GSM
Width : 57/58''
Color : Various color or customize
Finish Process : Dyed ,Waterproof , TPU membrane
3 .About RPET Fabric:
RPET fabrics is a new type of Recycled fabrics, the full name is Recycled PET Fabric (Recycled polyester fabrics), their raw materials is from Recycled plastic bottles after the product checking ,separation ,section , reel off raw silk from cocoons, cooling and RPET yarn, and it is commonly known as coke bottle green cloth.
The fabric can be recycled, saving energy, oil consumption and reducing carbon dioxide emissions. Each pound of recycled RPET fabric can save 61,000 BTU of energy, equivalent to 21 pounds of carbon dioxide. The fabric can also be tested by MTL, SGS, ITS and other international standards after environmental dyeing, environmental coating and calendering. Among them, phthalates (6P), formaldehyde, lead (Pb), polycyclic aromatic hydrocarbons, nonylophen and other environmental indicators all meet the latest European environmental standards and the latest American environmental standards.
4 . Features:
1. Waterproof and moisture permeability
Sports meeting sends out a large amount of sweat, and outdoor is hard to avoid encountering rain and rain, which is a pair of contradictions: to be able to prevent rain and snow from getting wet, and to be able to timely release the sweat out of the body.
Waterproof and moisture permeable clothing is in using the surface tension of water features, on the fabric coating a layer of PTFE (with the "king of the corrosion resistant fiber" teflon PTFE the same chemical composition but different physical structure) chemical coating, the surface tension of the enhancement of the fabric to make water tightening and cannot be spread out as far as possible, infiltration of fabric surface, thus unable to through the porosity of the fabric tissue. At the same time, the coating is porous, and the water vapor in a single molecular state can be distributed to the surface of the fabric through the capillary channels between the fibers.
2 .Antifouling and easy decontamination
Outdoor sports often walk through the muddy and humid mountains and forests, clothes are dirty is inevitable, this requires the clothing appearance to be as far as possible not easy to be stained by stains, and once contaminated and easy to wash and remove.
The surface properties of the fiber are changed, and the surface tension of the fabric is greatly increased, which makes it difficult for oil and other stains to penetrate into the fabric. The slight stains can be removed by wiping with wet cloth, and the heavier stains are easy to clean.
Anti-fouling is not only able to prevent oil pollution, but also has waterproof and moisture permeable properties. It is generally called "three anti-fouling" (water repellent, oil repellent, anti-fouling), which is a practical and effective advanced chemical finishing method, and is commonly used in clothing outer layer and the fabric finishing of backpacks, shoes and tents.
5 . Quality Control:
Property | Method | Standard |
Washing | BS EN ISO 105 C06 Test A-C | 3-4 |
Perspiration | ISO 105 E04 | 3-4 |
Dye Transfer | AATCC 163 | 3-4 |
Seam Slippage | EN ISO 13936-1 | > 200N |
Bursting Strength | BS EN ISO 13938 | > 40BL(knit) |
Snagging Resistance | ASTM-D-3939 | 4(knit) |
Tensile Strength | BS EN ISO 13934-2 | > 35bl |
Abrasion Resistance | ASTM D3884-09 H-18WHEELASTM D3884-09 H-18WHEEL 500G/Wheel | PU >1500r |
Abrasion Resistance | EN ISO 12947-2 | Fabric >20000r |
Pilling Resistance | EN ISO 12945-2 | 3-4 |
Water Repellency | AATCC-22-2010 | |
Water Resistance | AATCC-127-2008 | 3000/ 5000/ 8000 (according to customer requirements) |
PH | 4.0-7.5 |
6 .More pictures: