63-200kg 304 Stainless Steel Sanitary Plate Heat Exchanger Of Auxiliary Brewing Equipments With NBR

Plate heat exchanger is an efficient heat exchanger made of a series of corrugated metal plates.A thin rectangular channel is formed between plates to exchange heat through plates.Plate heat exchanger is an ideal equipment for heat exchange of liquid - liquid and liquid - steam.It has the characteristics of high heat exchange efficiency, small heat loss, compact structure, small footprint, wide application and long service life.Under the same pressure loss, the heat transfer coefficient is 3-5 times higher than that of the tubular heat exchanger, and the floor area is one third of the tubular heat exchanger, and the heat recovery can reach up to 90%.

1. "swallow-tail" design is adopted for the suspension of plate heat exchanger plate, avoiding the self-weight and extrusion type.

2. The plate heat exchanger plate adopts the mutual locking function, which can play a fixed role.

3. The four sides of plate heat exchanger plate have "honeycomb" design, which makes it easy for users to recognize the correctness of the installation.

4. The plate heat exchanger sealing gasket adopts the card free adhesive type, which can greatly save the maintenance time in the future (a quarter of the time saving is saved).

5. The plate heat exchanger seal gasket is designed as "trapezoidal shape", which can enhance the service life of the gasket.

6. Uniform distribution on the plate heat exchanger plate has a complex pattern, the plate is divided into multiple parts, each part of the grain are different point of view, and the overlap exposure and changeable flow channel is formed on the whole plate, plate grain design throug

Sheet material:

stainless steel SUS304 SUS316L.

Clean water, river water, food oil, mineral oil.

industrial pure titanium and titanium palladium alloy Ti tanium and Pal ladium.

Seawater, brine, salt.

Hadtelloy Alloy.

Concentrated sulfuric acid, hydrochloric acid, phosphoric acid.

Nickel and Nickel

High temperature high concentration caustic soda.

Technical advantages and characteristics of plate heat exchanger:

1: high coefficient of heat transfer, heat transfer plate on the circles of special design, can make the fluid flow in low flow velocity under the intense turbulence, turbulence since the net effect and can prevent dirt, make the heat transfer coefficient of the plate heat exchanger of shell and tube heat exchanger for 3 to 5 times.

2. Economy: under the premise of changing heat to him, compared with the shell type: less investment and lower running cost.Low maintenance cost.

3: adjustable: only add and reduce plate to meet the requirements of process change.

4. Compact structure.

5. Easy to clean and repair.

The design selection shall provide the following information:

1. Cold, heat medium's sexual parameters: such as ph, chlorine content, viscosity, density, thermal conductivity, specific heat, etc.

2. Cold, heat medium import and export temperature.

3. The flow of cold and heat medium.

4. Pressure loss requirements for cold and hot media.

5. Inherent characteristics of plate heat exchanger, such as sheet material, sealant gasket material, etc.