Vertical Type Single Spiral Extruder 7T Capacity For Bricking Making

Traditional extruders generally use soft plastic clay as raw material, which requires less performance of vacuum extruder, but nowadays, due to the requirements of raw material as well as process, basically in hard plastic as well as semi-hard plastic, the extrusion pressure is 3 to 4MPa, which poses a challenge to traditional extruder equipment; at the same time, the traditional extruder uses horizontal one, which is very disadvantageous for clearing machine; at the same time, the traditional extruder is For the processing of fast solidifying products is defective, continue to use the traditional vacuum extruder can not meet the needs of today's output products, and secondly, it will also cause damage to the machine, once the vacuum extruder failure will affect the economic efficiency of enterprises. This requires the strength of the vacuum extruder to be improved in all aspects. Therefore, according to the performance characteristics of these raw materials and the quality requirements of the products, it is necessary to update the supporting machinery and equipment, and the traditional vacuum extruder has been difficult to meet the requirements of the industry use. In response to this requirement, we have improved the design of the vertical single screw vacuum extruder.

In response to the shortcomings of the conventional vacuum extruder which is not applicable to the production of hard plastic clay, the tedious machine cleaning and the low quality of extruded products, a vertical single screw vacuum extruder is provided to improve the quality of output products. The mechanical connection of the single screw makes the extruded products have certain shape and size, high mechanical strength, high density, low water content and smooth surface, in which the pressure head is removable, which makes it easy to clean the machine.