Whole House Prefilter System Sediment Water Filter with 3/4" MNPT + 3/4" MNPT​

What is a water prefilter?

A pre-filter, also known as a sediment filter, eliminates dirt, sand, rust, silt, and other large suspended particles and sediments from the water before it goes through the primary filtration system. It cleans the water and prepares it for further purification.

Is a prefilter necessary?
A pre-filter is an integral part of almost any air purifier that you see on the market. It's the first filtration stage, and it essentially helps capture large particles. This prolongs your filter's life, making your system much more efficient.

The Role of Prefilter

1. Remove the precipitated impurities and bacteria, microbial remains, rust, sand and mud and other particles larger than 5 microns impurities produced by the pipeline to avoid harm to the human body and skin.
2. Protect the downstream pipeline, water purifier, water heater, washing machine, faucet, shower, and toilet.

The Current Situation of Water Pollution in the World

The World Bank reports that at least 80 countries are in water shortages and 2,000,000,000 people lack access to clean water. More disturbingly, the World Health Organization has reported that 1,000,000,000 people lack enough water to meet their basic needs, unfortunately, in many countries, water is scarce or contaminated.
BRISKSPRING provides a wide range of filtration and economical solutions based on different water resources.

【Whole House Water Pre-Filter】: Sediment filter for well water. Using aviation plastic, LEAD-FREE brass, and 316L Stainless steel mesh which makes a durable water filter used for a long lifetime, you need not worry about the unhealthy water problem.

【Spin Down Sediment Water Filter】: Spin down sediment water filter can purify the municipal household water and well water in an automatic way, flushable and reusable

【Easy Cleaning】: Turn on the valve on the bottom, and the filter will clean by itself. It is recommended to flush it regularly (daily or weekly), depending on the water usage, sediment amount, and hardness level.

【Effective Remove Sediment】: 40um stainless steel mesh inner to effectively remove harmful substances. Speed installation, save your time. Can stand up to 20 GPM and better use between 30-120 PSI.

[High-Efficiency Whole House Pre-Filtration] T3whole house sediment water filter system uses a 40-micron stainless steel filter mesh, which can efficiently filter out large particles such as sediment, debris, rust, dirt, and sand before raw water enters the downstream plumbing system. The T3 whole house spin-down sediment filter acts as the first defense line to your home water appliances (e.g., dishwasher, washing machine, water heater, etc.), and prolongs the service lifespan of these facilities.

[Quick Installation & Twist To Flush] This home sediment filter can easily be installed to the main water pipe within a few minutes. T3 adopts a Twist-To-Flush design, which is quick and easy without disassembly. With provided 1/4” quick connect drain tubing attached and a built-in scraper, twist the flush valve to scrape the mesh filter and flush. Effortless and hassle-free backwashing ensures the filter mesh is always thoroughly cleaned and prevents clogging issues.

[Heavy Duty Material & Crack-Free] T3 reusable whole house sediment water filter features with reinforced construction. The main body is made of food-grade heavy-duty plastic, which has passed the 900 psi bursting test and water hammer test and is thus proved sturdy enough to withstand strong feed water pressure. The valve head and adapters use lead-free brass copper materials, guaranteeing durability. No more cracking or leaking issues!

[Maintain Strong Water Flow] Unlike other sediment water filters on the market, T3 has minimum impact on feed water pressure and almost maintains the original feed water pressure level. The water flow rate can reach 20 gallons per minute, therefore guaranteeing a sufficient and in-time supply of pre-filtered water to downstream household water fixtures and serving your daily water need (e.g., washing, shower, laundry, cooking, etc.).

[Great Compatibility] Comes with two pairs of 3/4” joint fittings, this spin-down sediment water filter is compatible with All threaded connectors (Not Included): 1” female NPT, 3/4” Male NPT, and 3/4” Female NPT. Great compatibility saves your time & energy and makes your installation process seamless.

FAQ:

Q1: Are you a manufacturer?

A: Yes. We are a top manufacturer of water filters in China and an industry leader and standard drafting units. For the water prefilters, we have already developed over ten generations of different types of washing modes for the filters.

Q2: Can we use our logo/brand?

A. Yes, we already do OEM and ODM with famous brands like Honeywell, Pentair, Vaillant, and many other first-tier brands in the world.

Q3: Can you offer a sample to check the quantity?

A: Yes. We offer agent prices for samples.

Q4: What's the order delivery time?

A: Our production capacity is 1500000 units per month, and the Lead time is according to the order quantity, order models, and packing. Generally, it takes about 7-25 days.

Q5: Why should I choose BRISKSPRING?

A: 1) We have full production chains, from industrial design, to mold, plastic injection, and copper parts. Every part of your filters and the copper parts are made by ourselves. The product quality and cost are under control.

2) Most filters have international certifications such as NSF, SGS, and RoHS.