AC 110V Electric Pulse Igniter for Gas Infrared Burner,Infrared Heater,Industrial Burner
NO
| Items | Quotas | |
1 | Rated operational voltage | 110/220VAC | |
2
| Discharge frequency | 50Hz | |
3 | Arcing distance | ≥6mm | |
4 | Duration of ignition | 10s | It can be adjusted according to your requirements |
5 | Duration of rekindling | 10s | |
6
| Discharge energy | ≥4J | |
7
| Discharge cycle | ≤400ms | |
8
| Width | ≥12μs | |
9 | Deferent high pressure | ≥15KV |
Product Description
* Electric ignition or switching control ignition
1.Vibration: amplitude: 1.5; vibratory frequency: 10Hz; it was tested in
the direction of X, Y, Z when it has vibrated for 30m.
2.Strength of wire coupling: Along the direction perpendicular to the
connection wire, the test was made when the wire has been exerted
20N dead load.
3.Blow test: At the height of 1m, in the direction of X.Y.Z, the test is
made when it has fallen off naturally on a board with a thickness of
30mm.
Contact
Cici Lei
Phone&Wechat&Whatsapp No.: