34w Electrostatic Powder Spray Machine Chrome Spray Machine For Industrail
Product Introduction
The spray equipment uses an automatic current feedback circuit and adds a pulse control circuit. The gas control part adopts two-stage gas source filtration, voltage regulation and air pressure adjustment, all designed as preset adjustments. The powder output is more uniform, the atomization is better, and the dead angle is much better.
Use the digital panel forwarding key. It can change the pulse and normal function, and voltage current display function. With a very high powdering rate and the best coating quality.
Product Specification
MODEL | THD001 | THD002 | THD003 | THD004 |
Dimension | 64*46*98 | 64*46*98 | 64*46*98 | 64*46*98 |
Weight | 32 | 31 | 31 | 32 |
Input power | 50 | 34 | 34 | 34 |
Input voltage | 110/220VAC | 110/220VAC | 110/220VAC | 110/220VAC |
Frequency | 50-60Hz | 50-60Hz | 50-60Hz | 50-60Hz |
Max Output voltage | 0-100KV | 0-100KV | 0-100KV | 0-100KV |
Hopper volume | 55L | 55L | 55L | 55L |
Polarity | Negative | Negative | Negative | Negative |
Prepare fluidized barrel
Set the drain - add powder - adjust the fluidization size through the controller
Open the spray booth
Open the spray booth according to the relevant instructions
Boot
Turn on the controller – turn on the power switch to ON – the controller indicator lights up and enters the operating state
characteristics
1. The workplace can be painted at room temperature