304 SS 220v Belt Type Bucket Elevator Special Equipment For Material Lifting
Continuous bucket elevators are used to handle powders, bulk solids or friable ,fragile materials because they minimize product damage or are used to handle light fluffy materials where aeration of the product must be avoided. Continuous bucket elevators have buckets spaced continuously and operate at slower speeds. The continuous bucket placement allows the force of gravity to discharge their load onto the inverted front of the proceeding bucket. The bucket then guides that material into the discharge throat on the descending side of the elevator.
Advantages
A wide selection of replacement buckets is available.(stainless steel,PP,ABS,carbon steel)
· Easy installation and operate
· Energy saving
· The material is zero broken
· Heavy duty motor mount
· Adjustable chain
· Multipoint feeding and multipoiint unloading
· no raise dust,no leak
· Smooth running&quiet
Sizing Table | ||||||||||
| CHZD-3 | CHZD-6 | CHZD-10 | CHZD-15 | CHZD-20 | CHZD-25 | CHZD-30 | CHZD-35 | ||
Transmit Mass | 100% | m3/h | 6 | 15 | 22 | 30 | 45 | 56 | 68 | 80 |
75% | 4.5 | 11 | 16.5 | 22.5 | 33.5 | 42 | 51 | 60 | ||
Bucket | Volume | L | 3 | 6 | 10 | 15 | 20 | 25 | 30 | 35 |
Width | mm | 370 | 470 | 870 | 500 | 560 | 690 | 815 | 940 | |
Distance | mm | 228.6 | 330 | |||||||
Chain | QTY | -- | 2 | |||||||
Pitch | mm | 38.1 | 66 | |||||||
Single chain break loading(KN) minimum | 37.6 | 90 | ||||||||
Chain Wheel | Teeth QTY | -- | 26 | 22 | ||||||
Pitch cercle diameter | mm | 316.09 | 463.76 | |||||||
Bucket running speed | m/s | ≤0.3 | ≤0.25 | |||||||
Transmission shaft revolution | r/min | ≤0.3 | ||||||||
Max elevating height | m | ≤45 | ||||||||
Max horizontal transport distance | m | ≤100 | ||||||||
Total Power | KW | 0.75-22 | 1.1-22 | 2.2-22 | 5.5-22 | 5.5-30 |
Bucket Specification Size | |||||||
Item | Width(mm) | Volume(L) | Size | CH3-10 Drawing | |||
a | h | d(H12) | j |
| |||
CH3 | 370 | 3 | 235 | 120 | Φ13 | 20 | |
CH6 | 470 | 6 | |||||
CH10 | 870 | 10 | |||||
| CH15-80 Drawing | ||||||
CH15 | 500 | 15 | 340 | 195 | Φ12 | 45 |
|
CH20 | 560 | 20 | |||||
CH25 | 690 | 25 | |||||
CH30 | 815 | 30 | |||||
CH35 | 940 | 35 |
|
|
|
|
|
|
|
|
It can be used in any form