Heavy Duty Continuous Grain Bucket Elevator Stainless Steel Material
Z bucket elevator
Introduction of Z type Elevator Zero Broken Rate Elevator
Z type elevator is applied for elevation of granular stuff in grain warehouses, grain processing factories, feed processing factories, food processing industry, etc.
The Z type Elevator is popular for granular materials bulk conveying ascension, such as beans, chips, peanut, sweets, dried fruits, vegetables, chemicals and many other granules.
Advantage of Z type Elevator Zero Broken Rate Elevator
1. Zero damage for materials
2. Hoist hopper is made of Stainless Steel
3. This z type elevator can be used as a continuous or batch-type weighing machine or packaging production line by connecting with other equipment
Advantages
A wide selection of replacement buckets is available.(stainless steel,PP,ABS,carbon steel)
· Easy installation and operate
· Energy saving
· The material is zero broken
· Heavy duty motor mount
· Adjustable chain
· Multipoint feeding and multipoiint unloading
· no raise dust,no leak
· Smooth running&quiet
Sizing Table | ||||||||||
| CHZD-3 | CHZD-6 | CHZD-10 | CHZD-15 | CHZD-20 | CHZD-25 | CHZD-30 | CHZD-35 | ||
Transmit Mass | 100% | m3/h | 6 | 15 | 22 | 30 | 45 | 56 | 68 | 80 |
75% | 4.5 | 11 | 16.5 | 22.5 | 33.5 | 42 | 51 | 60 | ||
Bucket | Volume | L | 3 | 6 | 10 | 15 | 20 | 25 | 30 | 35 |
Width | mm | 370 | 470 | 870 | 500 | 560 | 690 | 815 | 940 | |
Distance | mm | 228.6 | 330 | |||||||
Chain | QTY | -- | 2 | |||||||
Pitch | mm | 38.1 | 66 | |||||||
Single chain break loading(KN) minimum | 37.6 | 90 | ||||||||
Chain Wheel | Teeth QTY | -- | 26 | 22 | ||||||
Pitch cercle diameter | mm | 316.09 | 463.76 | |||||||
Bucket running speed | m/s | ≤0.3 | ≤0.25 | |||||||
Transmission shaft revolution | r/min | ≤0.3 | ||||||||
Max elevating height | m | ≤45 | ||||||||
Max horizontal transport distance | m | ≤100 | ||||||||
Total Power | KW | 0.75-22 | 1.1-22 | 2.2-22 | 5.5-22 | 5.5-30 |
Bucket Specification Size | |||||||
Item | Width(mm) | Volume(L) | Size | CH3-10 Drawing | |||
a | h | d(H12) | j |
| |||
CH3 | 370 | 3 | 235 | 120 | Φ13 | 20 | |
CH6 | 470 | 6 | |||||
CH10 | 870 | 10 | |||||
| CH15-35 Drawing | ||||||
CH15 | 500 | 15 | 340 | 195 | Φ12 | 45 |
|
CH20 | 560 | 20 | |||||
CH25 | 690 | 25 | |||||
CH30 | 815 | 30 | |||||
CH35 | 940 | 35 |
Can be used in any form (according to customer requirements)
Free design for customers