The sunflower seed processing line Model YTK2000 can de-hull seeds and separate shells from kernels. After almost ten years of stagnation on capacity increasing, we solved the bottleneck with bigger hullers and new pre-separation process.
∆ The huller is different from that of TFKH1500, we use bigger and more impact ceramic part so the hulling efficiency increased by 30%.
∆ In previous models, the un-hulled seeds get separated by fish-scale screens which are not efficient enough. This time, we separate kernels from seeds roughly with mesh which is far more efficient. After the mesh pre-separation, the kernels go forward for fine separation with gravity separators and un-hulled seeds get conveyed back to the 2nd round de-hulling, with lower speed.
∆ After the 1st round dehulling, the un-hulled seeds’ shell will get loose, some of them are even half dehulled, so we arrange a lower speed to avoid breaking kernels. The two hullers’ impact force can be adjusted by frequency converter separately.
Process
Component
Feed-in hopper, two elevators, dehulling machine, separation sieves, un-hulled seeds cycling system, re-separators 3 sets, electric panels.
There is one multi-functional cleaner for option if the sunflower seeds are not cleaned.
Main Parameters
Power:With cleaner 19.98KW(380V)--Without cleaner 17.39kw
Processing Capacity:1000-1500Kg/Hour
(Based on moisture 10-12%, sizes above 3.2mm long-square hole. Variety for de-hulling)
Whole kernel: 90% Min.
De-hulling rate:95%-98% Min.
Loss in the shells:≤0.1%
Occupied Area:15.4m × 3.1m (with cleaner)
12.1m x 2.8m(without cleaner)
Height:5.25m
Weight:6.5T/7.2T
We can custom-design processing line for your special requirement..