KAMUJA Single Drum Ride-On Roller,Weight 12t - YZD-12.0
INTRODUCTION
① Hydraulic vibration and hydraulic steering, simple and light operation; flexible and stable performance
② The equipment is equipped with a wheel-side reduction axle and a domestic high-power, high-efficiency, high-power diesel engine.
③ Use brand-name hydraulic vibration systems and electronic vibration valves, with low failure rate and reliable quality.
④ The whole machine has beautiful and elegant design, high configuration, reasonable structure, low maintenance cost, excellent performance and high cost performance.
HYDRAULIC PITCH CONVERTER
It adopts hydraulic torque converter transmission, wheel speed reduction and rear rubber wheel drive.
Two-wheel air brakes, the walking system can be continuously variable in both directions in two gears.
MOTOR CUMMNINS TIER II
With strong power and reserve power
High-efficiency features
ARTICULATED
The whole machine is based on the rotary joint structure of a heavy-duty road roller.
The design complies with the three-level shock absorption principle, and the cab is spacious and bright.
Compaction | Static Line Load | N/cm | 385 |
Nominal Amplitude | mm | 1.80/0.44 | |
Vibration Frequency | Hz | 70 | |
Excitation force | Kn | 285/150 | |
Engine | Model | 48TA3.9-C25II | |
Type | Diesel Engine | ||
Power | Kw/rpm | 93/2400 | |
Fuel tank capacity | L | 200 | |
Lubrication oil capacity | L | 18 | |
Fuel Consumption | See the Diagram | ||
Walking | Speed | Km/h | 0-15 |
Turning Radius | mm | 3100 | |
Theoretical Climbing ability | % | 55 | |
Overall Dimension | Drum wheel width | mm | 2130 |
Drum wheel diameter | mm | 1400 | |
Wheelbase | mm | 3160 | |
Total Length | mm | 5610 | |
Total Width | mm | 2300 | |
Total Height | mm | 2700 | |
Packing Dimension | mm | 5800*2400*2810 | |
Total Weight | t | 12 |