Offshore Wind Power Tower Fabaricated based on requirement

Wind is a new energy with great potential. At the beginning of the 18th century, a violent wind swept across Britain and France, destroying 400 wind mills, 800 houses, 100 churches, and more than 400 sailboats. Thousands of people were injured, and 250000 trees were uprooted. As far as uprooting trees is concerned, the wind will produce 10 million horsepower (7.5 million kilowatts; one horsepower is equal to 0.75 kilowatts) in a few seconds! It has been estimated that there are about 10 billion kilowatts of wind resources on the earth that can be used to generate electricity, almost 10 times the world's hydropower generation. The energy obtained by burning coal every year in the world is only one third of the energy provided by wind in a year. Therefore, both at home and abroad attach great importance to the use of wind power to generate electricity and develop new energy.

The production process flow of the wind power tower is generally as follows: the numerical control cutting machine is used for blanking, and the thick plate needs to be beveled. After the plate is formed by the plate rolling machine, the welding of the inner and outer longitudinal joints is carried out after spot welding, positioning and confirmation. After the roundness inspection, if there is any problem, the secondary roundness is carried out. After the welding of the single section cylinder is completed, the hydraulic group is used to conduct the assembly and spot welding of the roller frame, after the welding of the inner and outer circumferential joints, straightness and other tolerances are checked, and after the flange is welded, After NDT and flatness inspection of welds, sandblasting and painting, internal parts installation and finished product inspection are completed, and then transported to the installation site.

Feature

product	wind power tower
painting	HEMPEL
color	yellow
material	high quiality steel
application	offshore and onshore
welding test	NDT
steel working	welding and inspected
process	rolled

Manufacturing process

1, material cutting

2. steel plate rolling and welding

3. welding

4. NDT test

5. paint inspection

6. testing and inspection instrument

7. wind turbine tower transfer and shipment