Large-Scale String Photovoltaic Inverters Burn-In Test Equipment Vehicle Inverter
Architecture diagram


Performance parameters

System | System structure | 1 control cabinet + 6 power cabinets |
Overall size | 5800*860*2050mm |
Total floor area | 5800*1800mm(Including operation area) |
Total input voltage | Three-phase five-wire system 220Vac (rated) |
Total input current | 200A*6 |
Total input power | 100kW*6 |
Application ambient temperature | 0-40℃ |
Application environment humidity | 0-95% |
Fire protection requirements | Materials meet UL 94V0 rating |
Environmental requirements | Materials comply with Rohs, WEEE requirements |
Safety requirements | Comply with IEC62368 international standard design requirements |
Burn-in cabinet | Units/Cabinet | 4 bits/cabinet |
Burn-in product power | 150kW/bit |
Burn-in product input voltage | 50-1000Vdc/bit |
Burn-in product input current | 500A/bit |
Burn-in Product Load Category | 130kW/bit |
Burn-in product output voltage | 220/380Vac/50Hz Three-phase five-wire |
Burn-in product output current | 200A/bit |
AC Connector Type | PA350 (L1/ L2/ L3/N/PE) |
DC Connector Type | MC4 photovoltaic connector (PV+/PV-/8 groups) |
Signal Connector Type | RJ45 (network port) |
Bit Status Indicator | No |
Input power | 600kW |
Feedback power | 520kW |
Constant temperature range | Room temperature+5°C-60°C |
Volume size | 800*800*2050mm |
Product area air duct direction | Forward wind, upward wind |
Cooling method | Air cooling |
Material | 1.5mm cold rolled sheet |