GI-V5B is a cost-effective MEMS inertial/satellite integrated navigation system. It has a built-in triaxial gyro, triaxial accelerometer, triaxial magnetic sensor, a pneumatic sensor, and a BD/GPS/GLONASS/GALILEO four-mode receiver. The velocity, position and attitude of the carrier can be measured, as well as the output compensated angular velocity, acceleration, magnetic course, air pressure, temperature and other information.
Feature
l -40 ° c to 60 ° c, full temperature calibration
l High sampling rate of 1KHz, 1KHz compensation operation, 1KHz navigation operation, 5Hz kalman filter
l Adoption of mass-produced cost-effective, highly reliable inertial sensors
l High performance, small size, light weight and low power consumption;
l Support on-site calibration of magnetic heading
Range and accuracy can be customized according to requirements
Gyroscope | |
Range | ±125,±250,±500,±1000,±2000(standard ±500) |
Zero | < 100°/h(room temperature ) |
Bias stability | Room temperature static test 1 hour, gyro 10 seconds average data calculation standard deviation ≤ 36 ° / h |
Bias repeatability | At room temperature, repeat the measurement 20 times of zero bias data, standard deviation ≤ 36°/h |
Bandwidth | 100Hz(customized) |
Accelerometer | |||
Range | ±8g,±10g,±20g,±40g(standard ±8g) | ||
Zero | <2mg(room temperature ) | ||
Bias stability | Static test 1 hour at room temperature, second mean data, standard deviation ≤0.2mg. | ||
Bias repeatability | At room temperature, repeat the measurement 20 times of zero bias data, standard deviation ≤ 0.2mg. | ||
Bandwidth | 100Hz(customized) | ||
Barometer | |||
Height accuracy | Meteorological conditions stable, room temperature conditions,< 10cm(1σ,Typical) | ||
Output frequency | 5Hz | ||
Magnetic sensor | |||
Range | ±8 Gauss | Noise Performance (RMS) | 0.4mG |
Resolution | 0.0625 mG | Directional accuracy | ±1.0° |