Apkt 1604 Milling Insert Carbide Face Cutter Cutting 1003 1135 Apkt160408

Quick Detail:

• Sharp edge
• Durable
• Processing efficiency
• Stable performance
• High finish

Description:

• The high heat resistance and cobalt rich gradient structure cemented carbide matrix ensures the high stability of the cutting edge. The blade has good resistance to high temperature, thermal shock and oxidation. It can be processed at high speed without cutting fluid and is more convenient to use; The blade is sharp and does not stick to the knife, reducing friction; Low cutting force, reduce wear; The fine density alloy substrate is coated with H01 film, which makes the blade surface smooth, reduces friction, is not easy to stick, has good wear resistance, strong deformation resistance and long service life; Smooth cutting, good chip removal performance, no chip buildup, good surface finish, suitable for finishing and semi finishing

Specifications:

Lead Time:

Notice:

1. Reasonable selection of cutting parameters:

Processing materials, cutting tools and cutting conditions are the three major elements

2. Reasonable tool selection:

(1) During rough turning, tools with high strength and good durability shall be selected to meet the requirements of large back cutting and large feed during rough turning.

(2) During fine turning, tools with high accuracy and good durability shall be selected to ensure the requirements of machining accuracy.

(3) In order to reduce the tool change time and facilitate tool setting, machine clamp knives and machine clamp blades shall be used as far as possible.

The three elements of cutting conditions: cutting speed, feed rate and cutting depth directly cause tool damage.

3. Reasonable selection of fixtures:

(1) The general fixture shall be selected as far as possible to clamp the workpiece, and the special fixture shall be avoided;

(2) The part positioning datum is coincident to reduce the positioning error.

4. Determine the processing route:

The processing route refers to the path and direction of the tool relative to the part during the processing of the NC machine tool.

(1) The requirements for machining accuracy and surface roughness shall be guaranteed;

(2) The machining route shall be shortened as far as possible to reduce the tool idle travel time.

Applications:

Our tungsten milling carbide insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: