SA - YZ4×50 Hydraulic Puller Tensioner Tringing Two Bundle Conductors Or Four Bundle Conductors
Performance
Max tension | 4X50Kn or 2x100kN |
---|---|
Max speed | 5km/h |
Note:the basic machine performance is calculated at 20°C and at sea level |
Characteristics
Bull-wheel diameter | 1600mm |
---|---|
Max conductor diameter | 40mm |
Mass | 11500kg |
Dimensions | 4700x2350x2800 |
Engine
Diesel | 82 Kw/2500 rpm |
---|---|
Cooling system | Air |
Electrical system | 12V |
Main component
Engine | Deutz air-cooled diesel engine |
---|---|
Main pump | Rexroth(BOSCH) |
Main motor | Rexroth(BOSCH) |
Reducer | RR(Italian) |
Radiator | AKG |
Hydraulic instrument |
|
Hydraulic valve | Rexroth(BOSCH) |
Hydraulic Transmission
2 Hydraulic half-closed circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
The machine is provided with tension pre-setting system.
Configuration
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control of maximum pull.
Hydraulic oil cooling system
Mechanical meter counter.
Rigid axle for towing at max speed of 30km/h with mechanical parking brake.
Hydraulic power pack to control 1 drum stand with hydraulic motor or 1 reel winder.
Gearbox with 3 operating positions:
--neutral position(with free bull-wheels for conductor loading and unloading)
--Low tensioner position.
--nominal tension position
Mechanical actuated front plough stabilizer.
Grounding device on board.