Orange Color TQD2500 Pneumatic CAT Traction Device 960rpm AC motor Haul-off

1,Φ2000 portal type pay-off machine:

1. Take-up form: upper casing type, gantry ground rail walking type；
2. Reel dia:Ф1000-Ф2000㎜；
3. Take-up tension form: manual friction disc (tension adjustable)；
4. Travel motor: BWED121-23×17-1.5KW (AC motor)
5. Lifting motor: BLD11-43-1.5KW (2 sets)
6. Clamping motor:Y90L-6-B5-1.1KW,960rpm
7. Structure form:

Potal rail walking type, upper casing type structure. The gantry is made of bending and welding. The two tops of the reel are driven by two motors via a cycloid reducer to lift the screw nut. Each apex can be lifted separately or simultaneously, and is equipped with mechanical and electrical protection devices. It can be equipped with different specifications of the top sleeve to meet the installation of different specifications of the reel; the reel clamping is realized by the motor cycloid reducer, and the clamping overload protection is provided. The tension of the pay-off is realized by manual friction disc, which is manually adjustable and stable. Reliable and easy to operate. The take-up frame adopts the centering device to realize the centering line.

PN2000portal take up and traverse

1. Line-receiving form: upper casing type, gantry ground rail walking type；
2. Coil diameter range:Ф1000-Ф2000㎜；
3. Reel load weight:13T；
4. Take up speed:2.3-50m/min
5. Traverse speed:1.6m/min
6. Take-up motor: 7.5kw AC motor, 1500rpm;
7. Traverse motor power:BWED121-59×17-2.2KW；
8. Lifting motor:BLD11-43-2.2KW(2)
9. Clamping motor:Y90L-6-B5-1.1KW,960rpm
10. Structure: The gantry is made of bending and welding. The two tops of the reel are driven by two motors via a cycloid reducer to lift the screw nut. Each apex can be lifted separately or simultaneously, with mechanical and electrical protection. The device can be equipped with different specifications of the top sleeve to meet the installation of different specifications of the reel; the reel clamping is realized by the motor cycloid reducer, and the clamping overload protection is provided. The winding motor is AC frequency conversion, and the gear transmission is carried out. And the worm gear drive shaft spindle rotates. The frequency-receiving controller controls the wire-receiving motor, and the cable adopts a high-speed ratio cycloidal speed reducer, which is driven by a 1.1KW variable frequency motor and an imported controller; the cable pitch is set by the cable finder, and the cable pitch can be set at any time. The size of the cable line automatically tracks the speed of the take-up line. The whole machine is equipped with speed, tension and cable adjustment potentiometer. The positive and reverse jog buttons are equipped with tension display and cable pitch display. Tension control is realized by constant torque mode.