Cage Type Twisting Machine, Cradle Type Lay up Machine, Cabling Making Equipment, Stranding Machine, Cabling Machine

500 (1+6+12+18+24) planetary type cage twisting machine
1.Application:
Suitable for twisting of bare copper wire, bare aluminum wire, power insulating wire , PVC/PE insulating wire, foaming coaxial wire,kinds of new energy sources (photovoltaic, wind energy source, charging pile, high-speed rail, nuclear power industrial etc) special cable, bending endurance and high flexible robot cable, intelligent machine( industrial 4.0 machine) inside control cable, medical treatment cable, elevator insulating wire, composite optical cable, premise cable, and so on.

2.Main technical specification:
2.1 Power supply:380V,50Hz
2.2 Feeding conductor wire diameter: Φ0.8mm~Φ2.5mm
2.3 Feeding insulating wire diameter: Φ2.0mm~Φ6.0mm
2.4 Finished wire diameter:MaxΦ50.0mm.
2.5 Size of bobbin:
(1)size of motorized pay-off bobbin: Φ630mm, Φ800mm and Φ1000mm
(2) size of twisting cage bobbin :Φ630mm,
(3)size of take-off bobbin : Φ2000mm
2.6 Suitable wire : soft PVC, PE insulating wire , rubber wire , foaming wire
and bare copper wire, composite optical cable and so on.
2.7 Lay pitch: 50-600mm ±5%
2.8 Rated speed: 15-90r/min
2.9 Machinery centre-height: 1000mm.


Other Information:
Our company can provide all kind of Wire and Cable making machine, such as Cage type twisting machine, Single twisting machine, tensiong taping machine, Chemical foam extrusion machine, Teflon high temperature extrusion, no halogen extrusion machine etc.


Equipment List:
1. Magnetic power payoff
2. Payoff stranding cage
3. Wire gathering device
4. Spark tester
5. Payoffsstranding cage
6. Wire gathering device
7. Spark tester
8. Center taping machine
9. Length measurement devuce
10. Two wheels capstan
11. Reciprocating take up


Features:
Planetary cabler is for manufacturing high quality control cable and optical fiber cable multistrand cable production equipment. It referency to the advanced cable equipment at home and abroad, combined with our wire and cable manufacturing situation and redesign. Its structure is composed of pay-off stand, stranding cage, die holder, wrapping bobbin, meter counter, tractor device and electric appliance controller etc. This machine adopts PLC program control, use frequency conversion motor controller makes output shaft speed constant. With hydraulic brake and electromagnet braking when machine is stopping, so as to achieve steady and quickly stop. Take up and traverse wire device adopts torque motor. Torque motor starts operating before main stranding cage starts running. Conversely, torque motor stops after stranding cage stops so as to to meet the requirement of cable manufacturing process.