BOSJ OFFER Related Products

The details of the scaffolding machine

Main Roll Forming Machine Working Craft

1. Technique parameters of the processing line

(1) Plate Material: Galvanized plate/strip steel

(2) Thickness of the plate : 1.5-2mm(different thickness is ok)

(3) Machine body :350mm H steel

(3) Wall thickness of the main forming machine: 18mm steel plate

(4) Outside debugging to change sizes

(5) Transmission chain : 2’’

(7) Reducer :15kw Xingxing Cycloid which works stably and no noise.

(8) Seam type semi-mat

(9) Roller material: GCr15 with quenched treatment 62-64°C

(10) Rollers: 16 steps including 9 shafts for leveling.

(11) 4 steps side wheels on the coil-input part for avoiding coil-deviation

(12) Forming part adopts side wheel rotation forming to reduce friction between rollers and coil. Easy and fast debugging

(13) Diameter of active shaft: 80mm, 45# steel

(14) Hydraulic pump power: 7.5KW

(15) PLC control systerm with inverter

(16) Woking Speed: 8-12m/min

3,5 Main Roll Forming machine

1. Working speed :8-12 m/min

2. Material thickness :1.0-1.2mm

3. Control system:PLC

4. Decoiler :5T

5. Punching :one set

6. Main roll forming rollers:16row rollers

7. Roll material:GCR15 Steel after quenching process HRC58-62℃,he chrome plating surface treatment

8. Material of the shaft and the shaft diameter:45# steel processing, shaft diameter is 70mm

9. Main machine power :18.5kw

10. Hydraulic station power:5.5kw

11. Hydraulic pressure:24Mpa

12. Scissors punching material:Cr12Mov,Quenching HRC 58-62℃

13. Length tolerance:3m±1.0mm

14. Voltage :380V, 50HZ,3 phrase

15. driving mode :chain driving mode

16. Machine size :16.5*2.2*1.6m

17. Rolling speed:12-15m/min

18. Shaft diameter:Φ76mm

19. Material of cutting:Cr12Mov with quench HRC58-62°

20. Tolerance:10m+-0.5mm

21. Hydraulic station:5.5kw

Main Machine Parameter