Strip​ Automotive Wiring Harness 40mm Low Frequency Red Tachograph Connection Wire

Product introduction

The common specifications of the wires in the automobile wiring harness are wires with a nominal cross-sectional area of 0.5, 0.75, 1.0, 1.5, 2.0, 2.5, 4.0, 6.0, etc. square millimeters, each of which has an allowable load current value, which is suitable for different power electrical equipment Wire. Taking the vehicle wiring harness as an example, the 0.5 specification line is suitable for instrument lights, indicator lights, door lights, ceiling lights, etc .; the 0.75 specification line is suitable for license plate lights, front and rear small lights, brake lights, etc .; the 1.0 specification line is suitable for turn signals, fog Lights, etc .; 1.5-gauge wire is suitable for headlights, horns, etc .; the main power line, such as generator armature wire, ground wire, etc., requires 2.5 to 4 square millimeters of wire. This only refers to the general car, the key depends on the maximum current value of the load, for example, the ground wire of the battery, the positive power line is a special car wire used alone, and their wire diameters are relatively large, at least a dozen square millimeters Above, these "Big Mac" wires will not be incorporated into the main harness.

Parameters:

Our Advantages:

1.Factory and trade integration,

2.Competitive price;
3.Timely delivery;
4.Technical support;
5.Samples for free;

6.High Trade Assurance Level

Our Services

1. Design and provide drawings service

2. Free sample service

3. Respond in time

4. OEM, ODM service

5. After sales guarantee service

Production equipment :

Fully Automatic Wire Cutting Striping and Crimping Machine

Wire Cutting and Stripping Machine

Multi Core Cable Cutting and De-sheathing Machine

Pneumatic Core Stripper

Wire Cutting Stripping and Twisting Machine

Microprocessor Based Battery Cable Cutting Machine

Pneumatic Cable Outer Jacket Removal Machine

Pneumatic Crimping Machine for Scattered Terminals

Semi Automatic Crimping Machines

Electronic Crimping Presses

Applicators

Toggle Crimping Machines

Wire Stripping and Twisting Machines

Soldering Station

Coupler Assembly Station

Air Compressor ( 3 Hp and 5 Hp)

25 Kva Generator

Microprocessor Based Harness Tester