Mini SDR 26 Camera Link Cable , Molding Type With Screw Locking
Description:
Himatch’s high speed camera cable design with 11pair+2 cores perfect shielding cable , with Honda® SDR 26pin connector (Shrunk Delta Ribbon) connector, MDR connector at each end, or different connector combination, robust molding with thumbscrew locking, They offer outstanding quality, durability, and high performance for industrial CCD camera with SDR port.
Specification:
Camera Link Configuration : In Full and Medium mode , use 2 wires
Standard | Camera Link | Transmit Speed Max | 2.04Gbps, |
Installation mode | Dynamic /Static | Install radius (Min) | 75mm |
Wire gauge | 28AWG | Cable OD | 9.1mm |
Jacket Material | PVC | Connector | SDR-MDR |
Operation Temperature | -20°C ~+ 80°C | Max Length | 15m |
Features:
Real-time signals transmission,low latency
100% electronically tested for functionality
Low noise and good performance in skew
Shielded pairs provide superior signal integrity
Overall foil and braid shielded provides EMI/RFI protection
Flexible and reliable cable
Application
Industrial imaging
Machine Vision system
Industrial camera
Scanning on pipelining
Products testing
Image recognition
Factory automation
Note:
The movable cable used for fixing will not have any problems . However, the fixing cable is NOT allow used for movable applications.
When installing the cable, please consider the allowable bending radius of the cable,if the bending degree exceeds the limit of the cable's internal structure or sheathed structure, it caused the deterioration of the cable's performance. Strongly recommend that the bending radius ≥ 4 R (R is the outer diameter of cable) when cable installed.