Drag Chain Firewire 800 cable Flexible PVC Cable for Industrial CCD Camera
Description:
Specification:
Standard | IEEE 1394 | Transmit Speed Max | 800Mpbs |
Installation mode | Dynamic/Static | Install radius (Min) | Static : 28mm; Dynamic :56mm |
Wire gauge | 26AWG | Cable OD | 7.1mm |
Jacket Material | PVC | Connector | 1394b 9pin |
Operation Temperature | -20°C ~+ 80°C | Max Length | 10m |
Features
Application
Bending radius.
The bending radius of the towed cable should be as big as possible. Recommended that the cable should be set ≥ 8D (D is the outer diameter of the cable)
Tow chain installation.
In the placement of towed cables, cables need to be tiled, cables can not be crossed or overlapped;
Select the tow chain with enough space to ensure that the cable occupies less than 30% space;
Install as many partitions as possible to avoid interference between cables.
Cable length
If the cable is too short and the cable is always tight in the drag chain, the cable jacket will be worn out because of the friction between the cable and the drag chain;
If the cable is too long, then the cable will be slack in the drag chain, also because of the friction between the cables, the jacket also will be wear and tear.
Both of the above will shorten the service life of the cable, please select the most appropriate cable length.