Panasonic mobile studio fiber optical connection system(JM-EFP-P21) consists of camera fiber optic adapter (TX) and fiber optic base station (RX) , custom-designed for long-distance transmission of Panasoniclive production system, to transmit 2CH 3G/HD-SDI signal from the camera side to the Base Station and 3 return videos (1CH 3G/HD-SDI and 2CH CVBS for TC/Genlock/BB/SYNC), Remote control data(support Panasonic RCU AJ-RC10G,ECU AG-EC4G etc),intercom(partline audio to support Clearcom) , tally, The system puts all of the signals needed for Panasonic multi-camera 3G/HD-SDI production onto 2xSM ST fiber with caps to protection.
Panasonic mobile studio fiber optical connection system(JM-EFP-P21) Power supply
This product is the battery power supply, the camera fiber optic adapter (TX) hanging on the camcorder via the front V shaped gusset plate , the back hanging battery while power supply to the Panasonic camera and fiber optic adapter.
Panasonic mobile studio fiber optical connection system(JM-EFP-P21)Features:
Easily pass the Pathological test(extremely harsh environments)
SD, HD, 3G automatic input detection, support 270Mbit / s - 1.48Gbit / s - 3Gbit / s rate, support SMPTE-424M 3Gbps HD-SDI, SMPTE-292M HD-SDI, SMPTE-259M SDI serial digital video signals and DVB-ASI signals
Uncompressed lossless transmission without delay;
More than 10KM transmission distance up to a maximum 80KM; when the opto-electric hybrid cable power supply the distance up to 250 meters.
Aluminum precision manufacturing, the size is about the BP battery size, lightweight and convenient, V-type with a flexible pinch;
Supports Panasonic RCU/ECU/ROP,
Mic level input (with mute function) and amp functions (volume adjustment)
Wet Tally output
Wide temperature range, low power consumption
V-mount battery optional
ST fiber with caps for protection.

Application:
Television studio, mobile studio
EFP Electronic Field Production, major sporting events and large celebrations broadcast live
ENG camera (outdoor photo camcorders) upgraded to a EFP camera.

Remote OB Van/Truck Video Feeds

Broadcast Studio Camera Feeds

SD Routing (Requires Optical Matrix Switch)

Long-Haul Signal Transport

Lecture Hall Projector Connectivity

Medical / Surgical Room Broadcast

Specifications:
General index

Optical:

SDI input/output:

Intercom:

Tally:

Remote:

Panel diagram:

Illustration of Led Indicator Status
Adapter:

• GENLOCK: Green light blink when Fiber2 is not connected,after Fiber2 is connected,Green light ON when the GENLOCK port has a signal, or not OFF.
• TC OUT: Green light blink when Fiber2 is not connected,after Fiber2 is connected,Green light ON when the TC port has a signal, or not OFF.
• SDI IN2: Green light ON when the SDI IN2 port input a signal, or not green light BLINK.
• SDI IN1: Green light ON when the SDI IN1 port input a signal, or not green light BLINK.
• SDI OUT: Green light ON when the SDI OUT port has a signal, or not green light BLINK.
• PWR: Red light ON when power supply is turned on.

Base:

• POWER: Red light on when power supply is turned on.
• SDI OUT1: Green light ON when the SDI OUT1 port has a signal, or not green light BLINK.
• SDI IN: Green light ON when the SDI IN port input a signal, or not green light BLINK.
• SDI OUT2: Green light ON when the SDI OUT2 port has a signal, or not green light BLINK.
• TC IN: Green light blink when Fiber2 is not connected,after Fiber2 is connected,Green light ON when the TC port has a signal, or not OFF.
• GENLOCK: Green light blink when Fiber2 is not connected,after Fiber2 is connected,Green light ON when the GENLOCK port has a signal, or not OFF.

Fiber1 and Fiber2: