Displayport KVM to Fiber Converter also named as Displayport KVM fiber extenders,which consist of a displayport transmitter and a receiver. It uses 11G high-speed photoelectric conversion transmission rate to convert ultra 2K/4K resolution Displayport and USB mouse and keyboard signals into optical signals over fiber cable while maintaining flawless image quality. This product is suitable for various requirements of ultra-high-definition Displayport+USB keyboard and mouse long-distance optical fiber transmission.
For example,an Displayport signal and USB signals comes from a source device such as a set-top box or Blue-Ray player, converted into light pulses by the transmitter module,after 10KM transmission over a single mode fiber then output at the receiver side via a display.
In fact,the Displayport Fiber Optic Extender supports either multi-mode or single-mode fiber transmission. which makes the equipment a powerful solution for digital display applications that require flawless signal quality over extremely long cable runs.
Product feature:
1, 11G fiber transmission rate, truly uncompressed and no delay transparent transmission.
2, support Displayport V1.1 standard, resolution can reach 720p/60Hz, 1080i/60Hz, 1080p/30Hz, 1080p/60Hz, 1080p/120Hz, 1920x1200, 2560x1440, etc., the highest resolution: Ultra-HD 4K (3840x2160@ 30Hz)
3, support HDCP, DPCD, DDC2B
4, multi-mode fiber 300 ~ 500 meters, single-mode fiber 10KM long-distance transmission.
5, support USB mouse and keyboard
Product specification:
Performance: | |
Compliance | Displayport V1.1 |
Maximum Video Bandwidth | 10.8Gbps |
Digital Audio Support | Dolby Digital, Dolby Digital Plus, Dolby True HD and DTS-HD Master Audio |
Supported HDTV Formats | Supports all HDTV resolutions including 1080p, 2K and 4K (UHD) formats |
Supported PC Resolutions | 720p/60Hz, 1080i/60Hz, 1080p/30Hz,1080p/60Hz, 1080p/120Hz,1920x1200,2560x1440,Ultra-HD 4K (3840x2160@30Hz) |
Optical: | |
Optical Transmitter | Laser Source: 1310nm / 1550nm |
Optical Receiver | PIN Photo Diode O/E Converter |
Fiber Cable Type / Max. Length | 62.5/125um MMF 300 meters ,50/125um MMF 500 meters 9/125μ single-mode optical fiber 10KM |
Connections: | |
Displayport | 20-pin DisplayPort female connectors |
Optical Input / Output | female LC optical connectors |
Mechanical: | |
Construction | Extruded Aluminum enclosure with black anodized finish |
Dimensions | 104 mm x 104 mm x 28 mm |
Weight | 700g per pair |
Environmental: | |
Operating Temperature | 0° to +50° C |
Storage Temperature | -20° to +70° C |
Humidity (storage / operating) | 10% to 90% (non-condensing) |
Power Requirements: | |
Power Source | Both Tx and Rx units must be powered using the supplied external AC power adapters |
External AC Power Adapter | Input: 100~240VAC / 50-60Hz, 0.5A Output: 5VDC, 2.0A |
Maximum Power Consumption | TX Unit: 3.5 watts RX Unit: 3.5 watts |
USB interface:
TX | 1,connect to PC/ HDMI source |
RX | 2, connect to Cable keyboard or mouse |
Connection Diagram