4Port USB3.0 fiber extension hub,also named as 1 TO 4 USB3.0 fiber optic extender, which through a two-core or one core fiber to transmit more than 5Gb/s USB3.0 high-speed signal to 250 meters, USB3.0 fiber extension hub uses a dedicated USB3.0 PHY to meet the USB3.0 protocol requirements,and the SFP + photoelectric conversion to reach USB3.0 SuperSpeed signal stable transmission. This equipment consist of two parts-the host side (receiver Rx) and the device side (transmitter Tx). The host side uses type A USB3.0 connector for power supply, the device side uses external power supply.

Application areas

1, industrial video transmission

2, machine vision system

3, high-definition video surveillance system

4, high-speed data acquisition system

5, remote storage

6, digital signage and TV wall

7, industrial printer system

Features:

1, USB3.0 ​​high-speed signal transmission distance extended to 250 meters (single-mode or multi-mode fiber)

2, to meet the USB3.0 signal 5Gbps bandwidth

3, provide power for the other USB3.0 equipment

4, support all self-powered USB3.0 device

5, plug and play, no need driver software

6, USB3.0 A type interface

7, dual fiber or single fiber LC optical interface

8, not compatible with USB1.1 and USB2.0Product

specification:

Panel diagram:

Operation sequence

1. Connect Host-side (receiver Rx) into the USB3.0 interface on PC or Mac;

2. Connect 12V powr adaptor on the Device-side(transmitter Tx);

3. Connect other USB3.0 devices to the device-side (transmitter Tx).

Note: If the computer does not recognize the equipment, pls do as following:

1. Press the REST button on the device side for 5 seconds to restart the device.

2. Change another USB3.0 interface on the PC/Mac to re-connected.

3. Uninstall the "USB3.0 Hub”in the Device Manager,then reconnect it.

Note:During the course of the use, do not arbitrarily plug the fiber and USB3.0 cable, it may cause the device badly work.

Connection diagram: