4port USB3.0 fiber converter also known as 4CH USB3.0 fiber extender , through dual or single optical fiber to extend 4port USB3.0 high-speed signal to 250 meters, the rate of up to 5Gbps. The optical fiber extender uses the special USB3.0 PHY to meet the USB3.0 protocol requirements, using SFP + module photoelectric conversion, USB3.0 SuperSpeed high-speed signal to achieve stable transmission. USB3.0 fiber extender consists of the host- side (receiver RX) and client-side (transmitter TX) ,the Host side using USB3.0 A connector or external power supply, the device side using an external power supply, and through the USB3.0 A-type connector to power other devices

4CH USB3.0 fiber converter Product feature:

1, USB3.0 SuperSpeed high-speed signal transmission distance extended to 250 meters (single-mode or multi-mode fiber)

2, to meet the USB3.0 5Gbps bandwidth

3, power other USB3.0 equipment at TX side

4, support all self-powered USB3.0 devices

5, plug and play, adaptive to all operating systems

6, USB3.0 A type interface

7, dual-fiber or single-fiber LC optical interface

8, not compatible with USB1.1 and USB2.0

4Port USB3.0 fiber extenders Applications:

video conferencing, multimedia information dissemination, government departments, medical systems, commercial display, multimedia function hall, security monitoring, utilities and other fields.

For example: industrial video transmission / machine vision systems / HD video surveillance systems / high-speed data acquisition systems / remote storage / digital signage and TV wall / industrial printer systems

Product specification:

Panel diagram:

Equipment powered sequence:

(1) Receiver(host-side) powered via USB port from host PC

(2) Transmitter(client-side)powered with the DC 5 v adapter

(3)The USB3.0 device connect to the transmitter(client-side)

Note:

If the host PC does not recognize the device, you can do as following operations:

1 press the the REST key of transmitter(client-side)for 5 seconds, restart the device.

2 Connect another USB3.0 interface of host PC.

3 uninstall the "USB3.0 hub" in the device manager, re connect.

When the device is working, do not plug USB3.0 and fiber cable, so as to avoid the equipment does not work properly.

Connection diagram: